Difficulty

Moderate

Steps

6

Time Required

Suggest a time??

Sections

1

  • Front Panel
  • 6 steps

Flags

Missing Details

Some of this guide’s details are missing. Help users by adding tools, difficulty, or time.

  • BackNike+ SportWatch GPS

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Front Panel
  • Face the watch upside down so that the back of the watch is exposed. Unscrew the six size #000 5 mm long screws on the back using a size 000 Phillips head screwdriver.

Face the watch upside down so that the back of the watch is exposed. Unscrew the six size #000 5 mm long screws on the back using a size 000 Phillips head screwdriver.

1024

Step 2

  • Carefully separate the watch by pulling the band away from the main board.

Carefully separate the watch by pulling the band away from the main board.

Step 3

  • Two size #000 2.5 mm long screws will appear at the top of the main board. Unscrew them using a size 000 Phillips head screwdriver.

Two size #000 2.5 mm long screws will appear at the top of the main board. Unscrew them using a size 000 Phillips head screwdriver.

Step 4

  • Carefully use the blue plastic opening tool to pry the main board out of the front panel.
  • Make sure to be gentle so the ribbon cable that connects to the band does not break, it is fragile and not removable.

Carefully use the blue plastic opening tool to pry the main board out of the front panel.

Make sure to be gentle so the ribbon cable that connects to the band does not break, it is fragile and not removable.

Step 5

  • Use an iOpener that has been heated in the microwave for about a minute, or until warm. Place it on the front screen of the watch. Let it rest there for a minute.
  • If you are unfamiliar with this tool use the iOpener guide here

Use an iOpener that has been heated in the microwave for about a minute, or until warm. Place it on the front screen of the watch. Let it rest there for a minute.

If you are unfamiliar with this tool use the iOpener guide here

Step 6

  • Push the panel out from the back of the screen, using your fingers.

Push the panel out from the back of the screen, using your fingers.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 


                    Ian Eichorn

Member since: 10/22/2015

672 Reputation

                                      4 Guides authored                  



                       Badges:
                       14







                                                        +11 more badges

Team

                       UMass Dartmouth, Team 5-8, Gulbrandsen Fall 2015                        

                                                  Member of UMass Dartmouth, Team 5-8, Gulbrandsen Fall 2015 



                    UMASSD-GULBRANDSEN-F15S5G8                     


                                            3 Members                     


                                            5 Guides authored

Erick Sobreiro - May 25, 2016

Reply

Where I can find the replacement glass? regards