Nike Sportband Screen Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

                          10 minutes

Sections

External Case
2 steps
Screen
4 steps

Flags

BackNike+ Sportband
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              External Case

To begin the disassembly of your NikePlus Sportband, first remove the device from the rubber wristband.

To begin the disassembly of your NikePlus Sportband, first remove the device from the rubber wristband.

1024

Step 2

Finish the disassembly of your NikePlus Sportband by utilizing the metal spudger tool on the short edge to pry the external body pieces apart.

Finish the disassembly of your NikePlus Sportband by utilizing the metal spudger tool on the short edge to pry the external body pieces apart.

Step 3

              Screen

After the cover had been removed, use the metal spudger tool to remove the body of the device from the casing.

After the cover had been removed, use the metal spudger tool to remove the body of the device from the casing.

Step 4

Use the metal tweezers to pry the screen casing from the body of the device.
The screen casing is fastened to the body of the device by four clips located in each corner of the casing.

Use the metal tweezers to pry the screen casing from the body of the device.

The screen casing is fastened to the body of the device by four clips located in each corner of the casing.

Step 5

Flip the body of the device over so that the screen is now on the bottom.
The display ribbon cable is soldered to the motherboard. We were able to peel up the ribbon cable with a pair of tweezers.
Successfully resoldering this ribbon cable to the motherboard may prove difficult to the very small traces.

Flip the body of the device over so that the screen is now on the bottom.

The display ribbon cable is soldered to the motherboard. We were able to peel up the ribbon cable with a pair of tweezers.

Successfully resoldering this ribbon cable to the motherboard may prove difficult to the very small traces.

Step 6

Flip the body of the device back over so that the screen is facing up.
Using the tweezers, gently lift the screen from body of the device.

Flip the body of the device back over so that the screen is facing up.

Using the tweezers, gently lift the screen from body of the device.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 5 other contributors

                    Daniel Burtner

Member since: 02/15/2016

101 Reputation

                                      1 Guide authored                  



                       Badges:
                       4







                                                        +1 more badge

Team

                       IUPUI, Team 9-9, Wilson Spring 2016                        

                                                  Member of IUPUI, Team 9-9, Wilson Spring 2016 



                    IUPUI-WILSON-S16S9G9                     


                                            5 Members                     


                                            4 Guides authored

Introduction#

What you need#

Team#

Introduction

What you need

Team