Difficulty
Moderate
Steps
10
Time Required
10 minutes
Sections
4
- External Case
- 2 steps
- Screen
- 4 steps
- Motherboard
- 2 steps
- Battery
- 2 steps
Flags
1
Missing Details
Some of this guide’s details are missing. Help users by adding tools, difficulty, or time.
BackNike+ Sportband
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
External Case
- To begin the disassembly of your NikePlus Sportband, first remove the device from the rubber wristband.
To begin the disassembly of your NikePlus Sportband, first remove the device from the rubber wristband.
1024
Step 2
- Finish the disassembly of your NikePlus Sportband by utilizing the metal spudger tool on the short edge to pry the external body pieces apart.
Finish the disassembly of your NikePlus Sportband by utilizing the metal spudger tool on the short edge to pry the external body pieces apart.
Step 3
Screen
- After the cover had been removed, use the metal spudger tool to remove the body of the device from the casing.
After the cover had been removed, use the metal spudger tool to remove the body of the device from the casing.
Step 4
- Use the metal tweezers to pry the screen casing from the body of the device.
- The screen casing is fastened to the body of the device by four clips located in each corner of the casing.
Use the metal tweezers to pry the screen casing from the body of the device.
The screen casing is fastened to the body of the device by four clips located in each corner of the casing.
Step 5
- Flip the body of the device over so that the screen is now on the bottom.
- The display ribbon cable is soldered to the motherboard. We were able to peel up the ribbon cable with a pair of tweezers.
- Successfully resoldering this ribbon cable to the motherboard may prove difficult to the very small traces.
Flip the body of the device over so that the screen is now on the bottom.
The display ribbon cable is soldered to the motherboard. We were able to peel up the ribbon cable with a pair of tweezers.
Successfully resoldering this ribbon cable to the motherboard may prove difficult to the very small traces.
Step 6
- Flip the body of the device back over so that the screen is facing up.
- Using the tweezers, gently lift the screen from body of the device.
Flip the body of the device back over so that the screen is facing up.
Using the tweezers, gently lift the screen from body of the device.
Step 7
Motherboard
- Remove the four highlighted screws from the motherboard using the Philips screwdriver.
Remove the four highlighted screws from the motherboard using the Philips screwdriver.
Step 8
- Use the metal tweezers to lift the motherboard out of the device.
Use the metal tweezers to lift the motherboard out of the device.
Step 9
Battery
- Slowly lift the motherboard off of the mounting body of the band with a pair of tweezers.
Slowly lift the motherboard off of the mounting body of the band with a pair of tweezers.
Step 10
- Gently lay the motherboard upside down exposing the underside of the motherboard.
- The red and black battery wires may need to be desoldered from the board. Check out the How To Solder and Desolder Connections guide for some helpful tips on this.
- Using the flat edge of a spudger separate the battery from the body of the band.
Gently lay the motherboard upside down exposing the underside of the motherboard.
The red and black battery wires may need to be desoldered from the board. Check out the How To Solder and Desolder Connections guide for some helpful tips on this.
Using the flat edge of a spudger separate the battery from the body of the band.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 2 other contributors
Alyssa Setnar
Member since: 02/15/2016
331 Reputation
3 Guides authored
Badges:
8
+5 more badges
Team
IUPUI, Team 9-9, Wilson Spring 2016
Member of IUPUI, Team 9-9, Wilson Spring 2016
IUPUI-WILSON-S16S9G9
5 Members
4 Guides authored
