Difficulty
Moderate
Steps
3
Time Required
Suggest a time??
Sections
- Lower Cover
- 1 step
- Antenna Housing
- 1 step
- Vibrator
- 1 step
Flags
Member-Contributed Guide
An awesome member of our community made this guide. It is not managed by iFixit staff.
Confusing Text
Some of this guide’s text is confusing, duplicated, or off-topic. Clarify it by editing!
Needs More Images
A few more images would make this guide’s procedures crystal clear.
BackNexus One
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
What you need
Step 1
Lower Cover
- Using the plastic opening tool, push the blade into the space between the case and lower cover.
- Turn the opening tool slightly, the lower cover will detach on that side.
- Repeat on other side of the seam.
- The lower cover will slide off.
Using the plastic opening tool, push the blade into the space between the case and lower cover.
Turn the opening tool slightly, the lower cover will detach on that side.
Repeat on other side of the seam.
The lower cover will slide off.
1024
Step 2
Antenna Housing
- Remove the one T5 Torx screw
- Remove the one #00 Philips screw
- Lift up the end of the antenna housing and slide it outwards.
Remove the one T5 Torx screw
Remove the one #00 Philips screw
Lift up the end of the antenna housing and slide it outwards.
Step 3
Vibrator
- The vibrator is located on the back of the antenna housing.
- Use the spudger to pry up on the axle of the motor.
The vibrator is located on the back of the antenna housing.
Use the spudger to pry up on the axle of the motor.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 3 other contributors
Niklas Johnson
Member since: 01/31/2012
1,207 Reputation
18 Guides authored
Badges:
11
+8 more badges