Difficulty

Moderate

Steps

11

Time Required

                          15 - 30 minutes

Sections

4

  • Rear Cover
  • 2 steps
  • Battery
  • 2 steps
  • Battery Housing
  • 6 steps
  • Rear Speaker
  • 1 step

Flags

1

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

  • BackNexus One

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

What you need

Step 1

              Rear Cover
  • Using two fingers, push up on the rear cover.

Using two fingers, push up on the rear cover.

1024

Step 2

  • The rear cover slides up and off.

The rear cover slides up and off.

Step 3

              Battery
  • Using the plastic opening tools, pry the left bottom corner of the battery up.

Using the plastic opening tools, pry the left bottom corner of the battery up.

Step 4

  • Pull the battery up and out.

Pull the battery up and out.

Step 5

              Battery Housing
  • Remove the two Torx T5 screws.
  • Remove the one Philips #00 screw.

Remove the two Torx T5 screws.

Remove the one Philips #00 screw.

Step 6

  • Using the plastic opening tool, pry up the battery housing upwards.
  • Push pry tool down, undoing the plastic tab.

Using the plastic opening tool, pry up the battery housing upwards.

Push pry tool down, undoing the plastic tab.

Step 7

  • Pry the upper left tab open on the battery housing.

Pry the upper left tab open on the battery housing.

Step 8

  • Pry the top tab of the battery housing.

Pry the top tab of the battery housing.

Step 9

  • Pry the right side tab of the battery housing.

Pry the right side tab of the battery housing.

Step 10

  • Pull up on the battery housing.
  • Slide the battery housing out to remove it.

Pull up on the battery housing.

Slide the battery housing out to remove it.

Step 11

              Rear Speaker
  • Push up the speaker from the battery housing.

Push up the speaker from the battery housing.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors 


                    Niklas Johnson

Member since: 01/31/2012

1,207 Reputation

                                      18 Guides authored                  



                       Badges:
                       11







                                                        +8 more badges