Difficulty
Very easy
Steps
6
Time Required
10 minutes
Sections
1
- Antenna Cable
- 6 steps
Flags
Member-Contributed Guide
An awesome member of our community made this guide. It is not managed by iFixit staff.
BackNexus 5
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Remove the Battery Door
- The battery door of the Nexus 5 is held together with plastic clips.
- Use the plastic spudger to separate the battery door.
The battery door of the Nexus 5 is held together with plastic clips.
Use the plastic spudger to separate the battery door.
1024
Step 2
Unscrew the Midframe and Speaker Assemby
- Using your #00 Philips Screwdriver, remove the six screws holding the midframe in place.
- Remove the four screws at the bottom of the device holding the speaker assembly in place.
- The screw on the far right may be covered in adhesive. Use your plastic spudger to remove the adhesive covering the screw.
Using your #00 Philips Screwdriver, remove the six screws holding the midframe in place.
Remove the four screws at the bottom of the device holding the speaker assembly in place.
The screw on the far right may be covered in adhesive. Use your plastic spudger to remove the adhesive covering the screw.
Step 3
Remove the Midframe and Speaker Assembly
- Remove the midframe and speaker assembly.
Remove the midframe and speaker assembly.
Step 4
Remove and Replace the Antenna Cables
- The antenna cables are located on the right and left side of the battery (one is gray, the other is black).
- Using your plastic spudger, disconnect both ends of the antenna cables.
- Connect your new antenna cables.
- Make sure the antenna cables are securely connected.
The antenna cables are located on the right and left side of the battery (one is gray, the other is black).
Using your plastic spudger, disconnect both ends of the antenna cables.
Connect your new antenna cables.
Make sure the antenna cables are securely connected.
Step 5
Reassemble the Device
- Screw the midframe and speaker assembly back into place.
- Push the outer edges of the battery door down until you hear the plastic clips “click.”
Screw the midframe and speaker assembly back into place.
Push the outer edges of the battery door down until you hear the plastic clips “click.”
Step 6
Power on the Device
- Hold the power button until you feel the phone vibrate and/or see the Google logo displayed.
Hold the power button until you feel the phone vibrate and/or see the Google logo displayed.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 1 other contributor
Tyler Caldwell
Member since: 12/07/2017
181 Reputation
1 Guide authored
Badges:
6
+3 more badges
Team
IUPUI, Team S1-G1, Baechle Fall 2017
Member of IUPUI, Team S1-G1, Baechle Fall 2017
IUPUI-BAECHLE-F17S1G1
2 Members
6 Guides authored