Difficulty
Easy
Steps
6
Time Required
2 - 3 minutes
Sections
3
- Back Cover
- 3 steps
- Battery
- 2 steps
- Plastic Midframe
- 1 step
Flags
1
Step Trimmer
This guide has unnecessary steps. Trim them to be more concise!
BackNexus 4
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Back Cover
- Power off the phone, by long-pressing the power button and touching Power off.
- Remove the SIM tray using the SIM Card Eject Tool.
- This step is required in order to remove the back case.
Power off the phone, by long-pressing the power button and touching Power off.
Remove the SIM tray using the SIM Card Eject Tool.
This step is required in order to remove the back case.
1024
Step 2
- Remove the two screws from the bottom of the phone with a T5 Torx Screwdriver.
Remove the two screws from the bottom of the phone with a T5 Torx Screwdriver.
Step 3
- Gently open the back case by prying along the edge of the cover, starting at a corner of the phone and circling around the phone using a plastic opening tool.
- The opening process may take a few minutes. The plastic will make a light snapping noise as the back cover separates from the rest of the phone.
Gently open the back case by prying along the edge of the cover, starting at a corner of the phone and circling around the phone using a plastic opening tool.
The opening process may take a few minutes. The plastic will make a light snapping noise as the back cover separates from the rest of the phone.
Step 4
Battery
- Remove the two 1.8 mm Phillips screws holding down the battery connector.
- Using a plastic opening tool, disconnect the battery cable from its socket on the motherboard.
Remove the two 1.8 mm Phillips screws holding down the battery connector.
Using a plastic opening tool, disconnect the battery cable from its socket on the motherboard.
Step 5
Battery removal
- Remove the blue tape that secures the white antenna cable to the battery.
- Using a spudger, carefully disconnect the white antenna cable.
- Carefully pry the battery out with a Plastic Opening Tool, starting at the top left-hand corner and working down towards the bottom right-hand corner.
- If necessary, you can also use a plastic card to separate the battery from the metal midframe.
- The battery is securely glued to the phone. When reinstalling the battery, press the battery firmly against the adhesive strip.
Remove the blue tape that secures the white antenna cable to the battery.
Using a spudger, carefully disconnect the white antenna cable.
Carefully pry the battery out with a Plastic Opening Tool, starting at the top left-hand corner and working down towards the bottom right-hand corner.
If necessary, you can also use a plastic card to separate the battery from the metal midframe.
The battery is securely glued to the phone. When reinstalling the battery, press the battery firmly against the adhesive strip.
Step 6
Plastic Midframe
- Remove the nine 4.6 mm Phillips #000 screws. Gently lift out the plastic cover.
- The midframe is held in with two clips, one at either side. Use a plastic spudger to release each side and gently lift up and away.
Remove the nine 4.6 mm Phillips #000 screws. Gently lift out the plastic cover.
The midframe is held in with two clips, one at either side. Use a plastic spudger to release each side and gently lift up and away.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
7 other people completed this guide.
Author
with 8 other contributors
Kaitlyn Jones
Member since: 01/27/2013
4,952 Reputation
8 Guides authored
Badges:
12
+9 more badges
Team
Cal Poly, Team 3-32, Amido Winter 2013
Member of Cal Poly, Team 3-32, Amido Winter 2013
CPSU-AMIDO-W13S3G32
4 Members
8 Guides authored
