Difficulty
Easy
Steps
3
Time Required
5 minutes
Sections
1
- Back Cover
- 3 steps
Flags
0
BackNexus 4
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Back Cover
- Power off the phone, by long-pressing the power button and touching Power off.
- Remove the SIM tray using the SIM Card Eject Tool.
- This step is required in order to remove the back case.
Power off the phone, by long-pressing the power button and touching Power off.
Remove the SIM tray using the SIM Card Eject Tool.
This step is required in order to remove the back case.
1024
Step 2
- Remove the two screws from the bottom of the phone with a T5 Torx Screwdriver.
Remove the two screws from the bottom of the phone with a T5 Torx Screwdriver.
Step 3
- Gently open the back case by prying along the edge of the cover, starting at a corner of the phone and circling around the phone using a plastic opening tool.
- The opening process may take a few minutes. The plastic will make a light snapping noise as the back cover separates from the rest of the phone.
Gently open the back case by prying along the edge of the cover, starting at a corner of the phone and circling around the phone using a plastic opening tool.
The opening process may take a few minutes. The plastic will make a light snapping noise as the back cover separates from the rest of the phone.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
48 other people completed this guide.
Author
with 14 other contributors
Kaitlyn Jones
Member since: 01/27/2013
4,952 Reputation
8 Guides authored
Badges:
12
+9 more badges
Team
Cal Poly, Team 3-32, Amido Winter 2013
Member of Cal Poly, Team 3-32, Amido Winter 2013
CPSU-AMIDO-W13S3G32
4 Members
8 Guides authored
Gaetan - Oct 12, 2013
Reply
I have made some rearrangement at this guide:
It more logic to remove the tray before removing the screws.
I have used some pictures from the teardown to clarify, particularly for showing the inside of the Nexus 4 showing the battery installed. The original picture did not show the battery. I have also made better reference to the tools.
Doc Z - Apr 17, 2015
Reply
I ordered the back case using the provided link at etradesupply.com, and noticed it is not an original part: the wireless charging does not work at all (the coil has a much higher resistance than the original one). After insisting, they sent me another one, which gave the same result. Better avoid buying there if you expect original working products…
Martin Fei - Sep 27, 2015
Reply
What about the buttons and the NFC? I can buy a back cover with NFC included, but most seem to not have the buttons. Is it easy to remove the ones from the old cover and install them in the new cover?