Difficulty

Moderate

Steps

3

Time Required

                          4 minutes            

Sections

1

  • Front-Facing Camera
  • 3 steps

Flags

Better Introduction

Improve this guide by completing or revising its introduction.

  • BackNexus 10

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

What you need

Step 1

              Front-Facing Camera               
  • Remove the plastic cover located on the back of the device by prying off one side of the cover with a plastic opening device and peeling it back.

Remove the plastic cover located on the back of the device by prying off one side of the cover with a plastic opening device and peeling it back.

1024

Step 2

  • Pry the device apart by inserting a plastic opening tool in the seam between the plastic backing and display assembly. Use the tool to unclip the plastic tabs in between the backing and the display.
  • Pull the the plastic backing off the display assembly using your hands.
  • Do not do this step with only your hands. You will require a significant amount of force to separate the device.

Pry the device apart by inserting a plastic opening tool in the seam between the plastic backing and display assembly. Use the tool to unclip the plastic tabs in between the backing and the display.

Pull the the plastic backing off the display assembly using your hands.

Do not do this step with only your hands. You will require a significant amount of force to separate the device.

Step 3

  • Lift latch on front-facing camera connector.
  • Pull the connector toward the top of the device and remove the front-facing camera.

Lift latch on front-facing camera connector.

Pull the connector toward the top of the device and remove the front-facing camera.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 4 other contributors 

                    Benjamin Troller                     

Member since: 04/11/2016

2,139 Reputation

                                      5 Guides authored                  



                       Badges:
                       13







                                                        +10 more badges                           

Team

                       Cal Poly, Team 34-18, Maness Spring 2016                        

                                                  Member of Cal Poly, Team 34-18, Maness Spring 2016 



                    CPSU-MANESS-S16S34G18                     


                                            4 Members                     


                                            5 Guides authored