Difficulty

Moderate

Steps

4

Time Required

                          35 minutes

Sections

1

  • Battery
  • 4 steps

Flags

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

  • BackNextbook NXA116QC164 Tablet

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

What you need

Step 1

              Introduction
  • Time to gram the trusty Ifixit Kit
  • Always properly ground yourself when working on small electronics..

Time to gram the trusty Ifixit Kit

Always properly ground yourself when working on small electronics..

1024

Step 2

              Sliding off the back wall
  • Picture one and two: Seperate back wall and blue mid frame. You are releasing about 8 or 10 clips accross the top.
  • Picture three : Lay tablet flat and lift at camera side, while sliding the back wall away from you. This will keep you from breaking the clips around the keyboard docking area.

Picture one and two: Seperate back wall and blue mid frame. You are releasing about 8 or 10 clips accross the top.

Picture three : Lay tablet flat and lift at camera side, while sliding the back wall away from you. This will keep you from breaking the clips around the keyboard docking area.

Step 3

              Battery access
  • Picture 1 : Now your in the beast
  • Picture 2 : First you want to peel back this tape and expose the battery connector. Remove the battery connector before anything else.
  • Picture 2: Next remove the ZIF connector directly underneath of the battery connector.
  • Picture 3 : Finally remove the 2 ZIF connectors at the bottom of the battery. These cameras can be pulled out of your way to have access to the battery

Picture 1 : Now your in the beast

Picture 2 : First you want to peel back this tape and expose the battery connector. Remove the battery connector before anything else.

Picture 2: Next remove the ZIF connector directly underneath of the battery connector.

Picture 3 : Finally remove the 2 ZIF connectors at the bottom of the battery. These cameras can be pulled out of your way to have access to the battery

Step 4

              Battery removal
  • Picture 1: Once the battery is free you will want to apply heat by either a hot plate, or a heat gun, to ease the removal of it. Only use FLAT ifixit plastic pry picks. DANGER: Puncturing battery can lead to fire, damage to your device, or even personal injury. PLEASE BE CAREFUL and Happy fixing
  • ifixit and the creator of this walthrough is not responsible for any damages to your device or self. All repairs are done at your own risk
  • Once battery is removed, follow these steps in reverse to reassemble.

Picture 1: Once the battery is free you will want to apply heat by either a hot plate, or a heat gun, to ease the removal of it. Only use FLAT ifixit plastic pry picks. DANGER: Puncturing battery can lead to fire, damage to your device, or even personal injury. PLEASE BE CAREFUL and Happy fixing

ifixit and the creator of this walthrough is not responsible for any damages to your device or self. All repairs are done at your own risk

Once battery is removed, follow these steps in reverse to reassemble.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 1 other contributor 


                    David Kyzer

Member since: 07/27/2018

208 Reputation

                                      1 Guide authored                  



                       Badges:
                       5







                                                        +2 more badges