Difficulty

Moderate

Steps

6

Time Required

                          4 - 7 minutes

Sections

2

  • Back Cover
  • 3 steps
  • Speakers
  • 3 steps

Flags

Needs Better Images

Better photos will improve this guide. Help out by taking, editing, or uploading new ones!

Markup Mishap

This guide needs better markups. Help out by correcting or making some markup annotations.

  • BackNextbook Flexx 10

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

If your speakers are not working, they may need to be replaced. The connectors should be checked to make sure they are connected and tight before buying new speakers.

What you need

Step 1

              Back Cover
  • To begin, turn off the power to the device and remove the screen from the keyboard.
  • Open the 2-in-1, and hold the screen.
  • Press the silver button at the top of the keyboard.
  • When the screen lifts up, gently lift the screen away from the keyboard.

To begin, turn off the power to the device and remove the screen from the keyboard.

Open the 2-in-1, and hold the screen.

Press the silver button at the top of the keyboard.

When the screen lifts up, gently lift the screen away from the keyboard.

1024

Step 2

  • You may use your fingers, or a spudger. Be careful not to break your cover OR your fingernail. Removing the cover requires good judgement.
  • The goal is to separate the black from the silver. Start in a corner, or a flat edge – whichever works best for you. Remember to not use too much force.
  • Once you start the initial separation, keep going until you free one edge. The goal now is to free three edges of the rectangle.
  • If your progress stops on one side of the rectangle, go to the other side and try there.

You may use your fingers, or a spudger. Be careful not to break your cover OR your fingernail. Removing the cover requires good judgement.

The goal is to separate the black from the silver. Start in a corner, or a flat edge – whichever works best for you. Remember to not use too much force.

Once you start the initial separation, keep going until you free one edge. The goal now is to free three edges of the rectangle.

If your progress stops on one side of the rectangle, go to the other side and try there.

Step 3

  • Gently pull the back cover from the screen assembly.
  • Keep the plastic cover close. It’s great for holding screws!
  • When putting the cover back on, press firmly around to outside edge with the screen facing down on a flat, debris-free surface.

Gently pull the back cover from the screen assembly.

Keep the plastic cover close. It’s great for holding screws!

When putting the cover back on, press firmly around to outside edge with the screen facing down on a flat, debris-free surface.

Step 4

              Speakers
  • See the first image to see the position of the speakers and their connections.

See the first image to see the position of the speakers and their connections.

Step 5

  • To remove the speaker shown in the picture:
  • Remove both screws with a small Philips head screwdriver.
  • Look at how the connector sits, and how the wires are routed. You will need to put these back in the same orientation during reassembly.
  • Gently remove connector and replace assembly if needed.

To remove the speaker shown in the picture:

Remove both screws with a small Philips head screwdriver.

Look at how the connector sits, and how the wires are routed. You will need to put these back in the same orientation during reassembly.

Gently remove connector and replace assembly if needed.

Step 6

  • Gently pry speaker free.
  • Carefully pull cable free to connector.
  • Gently remove connector.

Gently pry speaker free.

Carefully pull cable free to connector.

Gently remove connector.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 2 other contributors 


                    James Campbell

Member since: 09/08/2017

471 Reputation

                                      3 Guides authored                  



                       Badges:
                       12







                                                        +9 more badges

Team

                       Western Carolina University, Team S1-G4, Virtue Fall 2017                        

                                                  Member of Western Carolina University, Team S1-G4, Virtue Fall 2017 



                    WCU-VIRTUE-F17S1G4                     


                                            5 Members                     


                                            12 Guides authored