Difficulty

Moderate

Steps

7

Time Required

Suggest a time??

Sections

1

  • screen
  • 7 steps

Flags

2

In Progress

This guide is a work in progress. Reload periodically to see the latest changes!

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

  • BackNexoc Pad 7

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Step 1

              Open housing
  • Turn off the device before attempting to open it.
  • Unscrew the 4 small Phillips screws on the back of the unit.

Turn off the device before attempting to open it.

Unscrew the 4 small Phillips screws on the back of the unit.

1024

Step 2

              Open housing
  • Carefully insert a solid, flat object between the front and back of the case.
  • Move this object carefully between the housing parts to separate them.

Carefully insert a solid, flat object between the front and back of the case.

Move this object carefully between the housing parts to separate them.

Step 3

              Removing the back of the housing
  • The soldering points of the speaker on the back are slightly detached.
  • Untie the front and back sides and place them on a smooth surface.

The soldering points of the speaker on the back are slightly detached.

Untie the front and back sides and place them on a smooth surface.

Step 4

              Disconnect the cable from the circuit board
  • Flip up the two clamps that hold the flat cables up to release them.
  • Carefully pull out the flat cables.
  • Unplug the cable on the bottom of the tablet.
  • The white cable at the top sits very tight, possibly use a small pair of pliers to help.

Flip up the two clamps that hold the flat cables up to release them.

Carefully pull out the flat cables.

Unplug the cable on the bottom of the tablet.

The white cable at the top sits very tight, possibly use a small pair of pliers to help.

Step 5

              Release the board from the housing
  • Turn the 3 small Phillips screws out of the board.

Turn the 3 small Phillips screws out of the board.

Step 6

              Disconnect the battery
  • Using a spatula, remove the glue between the battery and the screen.
  • The battery is soldered only with very thin solder points on the board.

Using a spatula, remove the glue between the battery and the screen.

The battery is soldered only with very thin solder points on the board.

Step 7

              Remove the screen
  • Take the board and the battery out of the case.
  • The screen can now be removed.

Take the board and the battery out of the case.

The screen can now be removed.

Repeat the steps in order to reassemble your device.

Cancel: I did not complete this guide.

        These translators are helping us fix the world!      Want to contribute?      Start translating ›

Special thanks to these translators:

100%

Israel

irlanda

Author

                                      with 1 other contributor 


                    Theo Mat

Member since: 11/12/2017

12,412 Reputation

                                      14 Guides authored                  



                       Badges:
                       24







                                                        +21 more badges