Newport Ht70 Plus Ventilator Air Intake Filter Replacement Repair Guide

Difficulty

Easy

Steps

5

Time Required

                          20 minutes            

Sections

1

• Air intake Filter
• 5 steps

Flags

0

• BackNewport HT70/HT70+

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Air intake Filter               

• Make sure that the Ventilator is turned OFF. The power switch is located in the back side of the ventilator.
• Remove the Power Cord.

Make sure that the Ventilator is turned OFF. The power switch is located in the back side of the ventilator.

Remove the Power Cord.

1024

Step 2

• Locate the right panel of the Ventilator.
• Remove the Air O2 mixer by rotating it counterclockwise, and then pull the mixer out.

Locate the right panel of the Ventilator.

Remove the Air O2 mixer by rotating it counterclockwise, and then pull the mixer out.

Step 3

• Remove the two thumbscrews by twisting then counterclockwise.
• Remove the filter cover. Use a prying tool if needed.

Remove the two thumbscrews by twisting then counterclockwise.

Remove the filter cover. Use a prying tool if needed.

Step 4

• Replace the old filter with the new one.
• Once replaced, place back the Filter cover.
• Screw the thumbscrews back into place, fastening them clockwise.

Replace the old filter with the new one.

Once replaced, place back the Filter cover.

Screw the thumbscrews back into place, fastening them clockwise.

Step 5

• Run a Circuit Check before you install the air O2 mixer back into place.
• Place back the air O2 mixer by adjusting the flanges into the proper position. And then rotate the air mixer clockwise to lock into place.

Run a Circuit Check before you install the air O2 mixer back into place.

Place back the air O2 mixer by adjusting the flanges into the proper position. And then rotate the air mixer clockwise to lock into place.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 1 other contributor 

                    Jorge Castillo                     

Member since: 04/10/2020

201 Reputation

                                      1 Guide authored                  



                       Badges:
                       4







                                                        +1 more badge                           

Team

                       Cal Poly, Team S7-G5, Paton Spring 2020                        

                                                  Member of Cal Poly, Team S7-G5, Paton Spring 2020 



                    CPSU-PATON-S20S7G5                     


                                            3 Members                     


                                            6 Guides authored