Difficulty
Moderate
Steps
4
Time Required
Suggest a time??
Sections
1
- Motherboard
- 4 steps
Flags
0
BackNeuTab N9
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Motherboard
- Turn off your device before beginning these steps.
- Insert the plastic opening tool into the seam between the screen and the back of the tablet. Move the opening tool along the seam until the back of the tablet releases.
Turn off your device before beginning these steps.
Insert the plastic opening tool into the seam between the screen and the back of the tablet. Move the opening tool along the seam until the back of the tablet releases.
1024
Step 2
- Use the soldering gun to separate all soldered wires from the motherboard.
- For a complete guide on how to solder, click here.
Use the soldering gun to separate all soldered wires from the motherboard.
For a complete guide on how to solder, click here.
Step 3
- Use a spudger to carefully release the tabs on the three ZIF connectors securing the ribbon cables to the motherboard.
- Carefully pull the ribbons out.
Use a spudger to carefully release the tabs on the three ZIF connectors securing the ribbon cables to the motherboard.
Carefully pull the ribbons out.
Step 4
- Use the Phillips #0 screwdriver to remove the three 1 mm screws from the motherboard.
Use the Phillips #0 screwdriver to remove the three 1 mm screws from the motherboard.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 2 other contributors
Allan Lieu
Member since: 09/20/2017
306 Reputation
3 Guides authored
Badges:
6
+3 more badges
Team
University of North Texas, Team S7-G7, Thomas Fall 2017
Member of University of North Texas, Team S7-G7, Thomas Fall 2017
UNT-THOMAS-F17S7G7
4 Members
8 Guides authored