Difficulty
Moderate
Steps
4
Time Required
20 minutes
Sections
1
- Motherboard
- 4 steps
Flags
0
BackNeuTab N7 Pro
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Motherboard
- Power off you device before beginning disassembly.
- Insert plastic opening tool and pry back case away from the device, slowly moving the plastic opening tool along the device.
Power off you device before beginning disassembly.
Insert plastic opening tool and pry back case away from the device, slowly moving the plastic opening tool along the device.
1024
Step 2
- Use a soldering gun to separate all soldered wires from the motherboard.
- For a complete guide on how to solder, click here.
Use a soldering gun to separate all soldered wires from the motherboard.
For a complete guide on how to solder, click here.
Step 3
- Use a spudger to carefully release the tabs on the three ZIF connectors securing the ribbon cables to the motherboard.
- Carefully pull the ribbons out with tweezers.
Use a spudger to carefully release the tabs on the three ZIF connectors securing the ribbon cables to the motherboard.
Carefully pull the ribbons out with tweezers.
Step 4
- Use Phillips #J0 Screwdriver to remove three 1mm screws from the motherboard
Use Phillips #J0 Screwdriver to remove three 1mm screws from the motherboard
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 2 other contributors
Travis McLean
Member since: 02/09/2016
322 Reputation
2 Guides authored
Badges:
11
+8 more badges
Team
USF Tampa, Team 7-1, Cheng Spring 2016
Member of USF Tampa, Team 7-1, Cheng Spring 2016
USFT-CHENG-S16S7G1
3 Members
10 Guides authored