Difficulty
Moderate
Steps
6
Time Required
30 minutes
Sections
2
- Lower Case
- 4 steps
- Motherboard
- 2 steps
Flags
0
BackNETGEAR WGT624 v3
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Lower Case
- Turn the device so that the bottom is facing up.
Turn the device so that the bottom is facing up.
1024
Step 2
- Use the plastic opening tool to carefully lift the rubber stops in each corner.
- Do not completely remove the rubber stops, because they are difficult to replace.
Use the plastic opening tool to carefully lift the rubber stops in each corner.
Do not completely remove the rubber stops, because they are difficult to replace.
Step 3
- Unscrew the 4 11.8 mm T-8 Torx screws from each corner of the device.
Unscrew the 4 11.8 mm T-8 Torx screws from each corner of the device.
Step 4
- Lift the lower case straight up from the rest of the router.
Lift the lower case straight up from the rest of the router.
Step 5
Motherboard
- Remove the clear plastic casing by lifting it straight up from the router.
Remove the clear plastic casing by lifting it straight up from the router.
Step 6
- Separate the motherboard from the top shell by lifting it straight up from the router.
Separate the motherboard from the top shell by lifting it straight up from the router.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 4 other contributors
Corey Worthington
Member since: 01/24/2013
50 Reputation
1 Guide authored
Badges:
7
+4 more badges
Team
Cal Poly, Team 3-31, Amido Winter 2013
Member of Cal Poly, Team 3-31, Amido Winter 2013
CPSU-AMIDO-W13S3G31
3 Members
6 Guides authored