Difficulty
Moderate
Steps
4
Time Required
20 minutes
Sections
1
- Keypad
- 4 steps
Flags
0
BackNest x Yale Lock
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
The touchpad is located inside the keypad. This touchpad is responsible for being able to input your code to unlock the door lock.
Before beginning this process, be sure that the device is off and not plugged into the lock.
What you need
Step 1
Keypad
- Unscrew all available screws that you can see from the back.
- The screws are 0.25 inches phillips screws.
- Make sure to not lose any of the screws, and keep track of them.
Unscrew all available screws that you can see from the back.
The screws are 0.25 inches phillips screws.
Make sure to not lose any of the screws, and keep track of them.
1024
Step 2
- Once you have unscrewed all the screws carefully remove the metal covering.
- Make sure that the wire safely goes through the hole.
Once you have unscrewed all the screws carefully remove the metal covering.
Make sure that the wire safely goes through the hole.
Step 3
- Then once again unscrew the two screws that you see.
- The screws have a height of 0.2 inches phillips screws.
- Make sure to not lose any of the screws, and keep track of them.
Then once again unscrew the two screws that you see.
The screws have a height of 0.2 inches phillips screws.
Step 4
- Once all screws are unscrewed proceed to tap the screen out of the metal casing.
Once all screws are unscrewed proceed to tap the screen out of the metal casing.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 3 other contributors
Christopher Gonzalez
Member since: 09/26/2022
313 Reputation
3 Guides authored
Badges:
4
+1 more badge
Team
CSU Los Angeles, Team 5-3, Adachi Fall 2022
Member of CSU Los Angeles, Team 5-3, Adachi Fall 2022
CSULA-ADACHI-F22S5G3
5 Members
5 Guides authored