Difficulty
Moderate
Steps
4
Time Required
20 - 25 minutes
Sections
2
- Casing and Faceplate
- 3 steps
- Battery
- 1 step
Flags
0
BackNest Hello
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Casing and Faceplate
- Insert the pick between the black faceplate and white casing of the Nest Hello.
- Pry the faceplate away from the device with the opening pick.
- If you have not opened the Nest Hello before, there will be a protective foam mesh that is glued to the plastic covering and the inside of the mesh, use a pick to cut through the mesh as much as possible.
- Completely remove the faceplate from the device, do not be afraid to pull hard.
Insert the pick between the black faceplate and white casing of the Nest Hello.
Pry the faceplate away from the device with the opening pick.
If you have not opened the Nest Hello before, there will be a protective foam mesh that is glued to the plastic covering and the inside of the mesh, use a pick to cut through the mesh as much as possible.
Completely remove the faceplate from the device, do not be afraid to pull hard.
1024
Step 2
- Peel back the cover stickers and use the Phillips #000 screwdriver to remove the four screws.
Peel back the cover stickers and use the Phillips #000 screwdriver to remove the four screws.
Step 3
- Insert opening pick between the white casing and the black internal circuitry and pry it out.
- There is a ribbon cable connecting the white casing to the circuit boards. Be careful not to tear out the cable while separating the casing from the circuit boards.
Insert opening pick between the white casing and the black internal circuitry and pry it out.
There is a ribbon cable connecting the white casing to the circuit boards. Be careful not to tear out the cable while separating the casing from the circuit boards.
Step 4
Battery
- Once the back casing is removed, disconnect the battery cable and remove the battery from the device.
Once the back casing is removed, disconnect the battery cable and remove the battery from the device.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
6 other people completed this guide.
Author
with 5 other contributors
Daniel Moore
Member since: 01/14/2020
592 Reputation
6 Guides authored
Badges:
12
+9 more badges
Team
Embry-Riddle Aeronautical University, Team S1-G7, Cromer Twal Spring 2020
Member of Embry-Riddle Aeronautical University, Team S1-G7, Cromer Twal Spring 2020
ERAU-CROMER TWAL-S20S1G7
4 Members
18 Guides authored
Patrick Ouellet - Dec 28, 2020
Reply
Any recommendations as to where we can find a replacement battery? Model #, specs?
Ryan - Jan 23, 2021
Reply
Battery and o-ring part source?
Leon Sparrow - Feb 8, 2021
Reply
What is the replacement battery?
JOHN ZUCKERMAN - Jan 6, 2023
Nest Hello NC5100US C1241290 Video Doorbell Wired
dessolle.emmanuel - Feb 24, 2021
Reply
Bonjour, j’ai besoin de changer la batterie.
Merci pour le tuto,
avez vous un liens pour la batterie svp ?
urgent