Difficulty

Easy

Steps

7

Time Required

                          1 minute

Sections

2

  • Outer Case
  • 3 steps
  • Motherboard
  • 4 steps

Flags

1

This guide has been the hard work of our awesome students and is found to be exceptionally cool by the iFixit staff.

  • BackNest Dropcam Pro

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Outer Case
  • Press in the mounting clips on each side of the case to remove the camera from the mount.

Press in the mounting clips on each side of the case to remove the camera from the mount.

1024

Step 2

  • Using a Philips #0 screwdriver, remove the four 3 mm screws.

Using a Philips #0 screwdriver, remove the four 3 mm screws.

Step 3

  • Lift the front of the case slowly, as there is an antenna cable attached to the motherboard.
  • Carefully disconnect the antenna cable from the motherboard. You will feel this cable “pop” out of place when disconnected.

Lift the front of the case slowly, as there is an antenna cable attached to the motherboard.

Carefully disconnect the antenna cable from the motherboard. You will feel this cable “pop” out of place when disconnected.

Step 4

              Motherboard
  • Insert a spudger tool under the micro-USB port and lift to separate the motherboard from the back case.

Insert a spudger tool under the micro-USB port and lift to separate the motherboard from the back case.

Step 5

  • Pull the motherboard away from the back case.
  • Unplug the red and black cable connecting the motherboard to the back case.

Pull the motherboard away from the back case.

Unplug the red and black cable connecting the motherboard to the back case.

Step 6

  • Using a Philips #0 screwdriver, remove the four 2 mm screws.

Using a Philips #0 screwdriver, remove the four 2 mm screws.

Step 7

  • Lift the lens and LED assembly away from the motherboard.
  • Unplug the yellow and white cable from the motherboard.

Lift the lens and LED assembly away from the motherboard.

Unplug the yellow and white cable from the motherboard.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      7 other people completed this guide.

Author

                                      with 5 other contributors 


                    David Foens

Member since: 09/03/2015

893 Reputation

                                      6 Guides authored                  



                       Badges:
                       19







                                                        +16 more badges

Team

                       USF Tampa, Team 15-4, Blackwell Fall 2015                        

                                                  Member of USF Tampa, Team 15-4, Blackwell Fall 2015 



                    USFT-BLACKWELL-F15S15G4                     


                                            3 Members                     


                                            12 Guides authored

fercervantes - May 6, 2016

Reply

where we can get the mother board to replace

kundimberi - Dec 13, 2016

I need this too

xtogamba - Dec 24, 2016

Reply

Where can I get the motherboard

Bruce Weissman - Dec 27, 2016

Reply

Can’t find it either. Silly to write an entire article for credit if parts arent actually available.

anonymous 6761 - Feb 8, 2017

Reply

searched for the MB online?? Why no mention of where to get it??