Nerf Vortex Vigilon Loading Spring Replacement Repair Guide

Difficulty

Easy

Steps

Time Required

                          10 minutes

Sections

Slide
2 steps
Nerf Vortex Vigilon Side Cover Disassembly
2 steps
Loading Spring
1 step

Flags

BackNerf Vortex Vigilon
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Removing the slide screws

The two slide pieces hold the orange sight in place. Expect that the sight will come off when you remove the slide pieces.
Using a screwdriver, carefully unscrew the three #00 1 cm Phillips screws holding the two slide pieces together.
Both sides of the slide will come off when the screws are removed.

The two slide pieces hold the orange sight in place. Expect that the sight will come off when you remove the slide pieces.

Using a screwdriver, carefully unscrew the three #00 1 cm Phillips screws holding the two slide pieces together.

Both sides of the slide will come off when the screws are removed.

1024

Step 2

              Removing the slide pieces

Lift both slide pieces off of the gun.

Lift both slide pieces off of the gun.

Step 3

              Removing the outer screws

Remove the twelve #00 1 cm Phillips screws.
Because the holes for the screws are deeper than the screw size, some of the screws may not come out even after you have completely unscrewed them. They will come out when you take off the outside cover in the next step, which is okay.
Rotate the gun so that the front is facing you to remove the final screw.

Remove the twelve #00 1 cm Phillips screws.

Because the holes for the screws are deeper than the screw size, some of the screws may not come out even after you have completely unscrewed them. They will come out when you take off the outside cover in the next step, which is okay.

Rotate the gun so that the front is facing you to remove the final screw.

Step 4

              Removing the outside cover

When removing the cover, the clip attachment and the spring will likely fall out of the gun.
Lift the outside cover off of the gun. Only the side where you removed the screws will come off.
The magazine will slide down automatically as you remove the cover.

When removing the cover, the clip attachment and the spring will likely fall out of the gun.

Lift the outside cover off of the gun. Only the side where you removed the screws will come off.

The magazine will slide down automatically as you remove the cover.

Step 5

              Removing the spring

Lift the spring out towards you.

Lift the spring out towards you.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 2 other contributors

                    Cara Pew

Member since: 09/29/2014

911 Reputation

                                      7 Guides authored                  



                       Badges:
                       17







                                                        +14 more badges

Team

                       Cal Poly, Team 13-6, Forte Fall 2014                        

                                                  Member of Cal Poly, Team 13-6, Forte Fall 2014 



                    CPSU-FORTE-F14S13G6                     


                                            5 Members                     


                                            7 Guides authored

Introduction#

What you need#

Team#

Introduction

What you need

Team