Nerf N Strike Maverick Trigger Repair Repair Guide

Difficulty

Easy

Steps

Time Required

                          20 minutes

Sections

Nerf N-Strike Maverick Trigger Repair
8 steps

Flags

BackNerf N-Strike Maverick
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Nerf N-Strike Maverick Trigger Repair

Remove the 10 screws on the outer shell of the Maverick.
Make sure to keep all the screws in a cup or container so they don’t get lost.

Remove the 10 screws on the outer shell of the Maverick.

Make sure to keep all the screws in a cup or container so they don’t get lost.

1024

Step 2

After removing all of the screws, slowly lift the gray top left piece.
The other side of the top left piece can also be taken off.

After removing all of the screws, slowly lift the gray top left piece.

The other side of the top left piece can also be taken off.

Step 3

Remove the top left screw.

Remove the top left screw.

Step 4

While holding the Maverick down slowly lift the outer shell.
Make sure the orientation of the Maverick matches the picture shown.

While holding the Maverick down slowly lift the outer shell.

Make sure the orientation of the Maverick matches the picture shown.

Step 5

Remove the screw holding the trigger to the body.
When screwing everything back together, remember to re hook the trigger spring.

Remove the screw holding the trigger to the body.

When screwing everything back together, remember to re hook the trigger spring.

Step 6

Check the inner chassis around the trigger area. Make sure the springs and parts can move freely.
If a part is broken, a replacement will need to be bought or taken from another Maverick.

Check the inner chassis around the trigger area. Make sure the springs and parts can move freely.

If a part is broken, a replacement will need to be bought or taken from another Maverick.

Step 7

After examining and fixing the chassis, screw the trigger back onto the body.
Hook the upper spring to the metal rod.

After examining and fixing the chassis, screw the trigger back onto the body.

Hook the upper spring to the metal rod.

Step 8

Replace the outer shell of the Maverick and the top left screw.
When reattaching the outer shell, make sure to hold the top left piece as shown in the first picture. This ensures that the spring remains connected to the rod.
Screw the top left piece back onto the Maverick.
Replace the 10 screws on the Maverick.

Replace the outer shell of the Maverick and the top left screw.

When reattaching the outer shell, make sure to hold the top left piece as shown in the first picture. This ensures that the spring remains connected to the rod.

Screw the top left piece back onto the Maverick.

Replace the 10 screws on the Maverick.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 4 other contributors

                    David Lim

Member since: 09/27/2015

110 Reputation

                                      1 Guide authored                  



                       Badges:
                       4







                                                        +1 more badge

Team

                       Cal Poly, Team 10-3, Green Fall 2015                        

                                                  Member of Cal Poly, Team 10-3, Green Fall 2015 



                    CPSU-GREEN-F15S10G3                     


                                            4 Members                     


                                            4 Guides authored

Introduction#

What you need#

Team#

Introduction

What you need

Team