Difficulty

Moderate

Steps

12

Time Required

Suggest a time??

Sections

1

  • Main Spring
  • 12 steps

Flags

Action Shots

Be an action hero! This guide needs images that better demonstrate how to perform specific actions.

  • BackNerf N-Strike Elite Strongarm

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

What you need

Step 1

              Main Spring
  • Remove the outside cover of the Nerf gun (cover and charging slide, 12 Phillips #0 screws).

Remove the outside cover of the Nerf gun (cover and charging slide, 12 Phillips #0 screws).

1024

Step 2

  • From the base, lift the action and the trigger.

From the base, lift the action and the trigger.

Step 3

  • Lift the Nerf dart cylinder and the firing mechanism (spring chamber).

Lift the Nerf dart cylinder and the firing mechanism (spring chamber).

Step 4

  • Unscrew screws (2) from the cylinder rotator mechanism.

Unscrew screws (2) from the cylinder rotator mechanism.

Step 5

  • Remove the air plunger and the spring from inside the chamber.

Remove the air plunger and the spring from inside the chamber.

Step 6

  • Turn the spring counter-clockwise to free the spring. Be careful at the beginning and the end of the process.

Turn the spring counter-clockwise to free the spring. Be careful at the beginning and the end of the process.

Step 7

  • Replace the spring.
  • The spring will be greasy. Don’t be alarmed. Be careful at the beginning and the end of the process because it is like getting a key ring on at the notches, particularly at the top of the chamber.
  • Tip: If dry, use a little vegetable oil on the O-ring before putting it back.

Replace the spring.

The spring will be greasy. Don’t be alarmed. Be careful at the beginning and the end of the process because it is like getting a key ring on at the notches, particularly at the top of the chamber.

Tip: If dry, use a little vegetable oil on the O-ring before putting it back.

Step 8

  • Return the plunger to the spring chamber.

Return the plunger to the spring chamber.

Step 9

  • Screw the cover back onto the cylinder rotator.

Screw the cover back onto the cylinder rotator.

Step 10

  • Place the spring chamber and the Nerf bullet cylinder back into the base.

Place the spring chamber and the Nerf bullet cylinder back into the base.

Step 11

  • Screw the trigger and the action back in. Swing the gray gun charging slide out when putting the action back in.

Screw the trigger and the action back in. Swing the gray gun charging slide out when putting the action back in.

Step 12

  • Secure the cover and the charging slide with the 12 screws.

Secure the cover and the charging slide with the 12 screws.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      4 other people completed this guide.

Author

                                      with 4 other contributors 


                    Robert

Member since: 03/18/2015

171 Reputation

                                      1 Guide authored                  



                       Badges:
                       7







                                                        +4 more badges

mike580358 - Aug 9, 2016

Reply

Where can I buy a replacement spring?

NEW CHANNEL - Jul 10, 2019

you can get a replacement or an upgrade spring at the website www.nfstrike.com

autisteck - Apr 8, 2020

Reply

When I put it back together it did not work

tiderfish - May 18, 2020

Reply

My kid got sand in this blaster and i was tasked with fixing. i degreased the parts and used a plastic grease to re lube, but it was too thick for the plunger so the darts limped out the barrel. so i opened it up and used some fogging oil in there after cleaning it out. works a treat. The biggest problem was the little spring on the barrel.. I lost it 4 times, and the fifth it was gone. So i used a spring from a clicky pen and it works great now!