Difficulty

Easy

Steps

6

Time Required

                          30 minutes

Sections

1

  • Springs
  • 6 steps

Flags

Better Introduction

Improve this guide by completing or revising its introduction.

  • BackNerf Gun

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Springs
  • Remove three screws with a Phillips #1 screwdriver.
  • Remove the pump grip.

Remove three screws with a Phillips #1 screwdriver.

Remove the pump grip.

1024

Step 2

  • Remove thirteen highlighted screws using a Phillips #1 screwdriver.
  • The top rail has shorter screws than the rest.
  • Some of these are captive screws and cannot be removed.

Remove thirteen highlighted screws using a Phillips #1 screwdriver.

The top rail has shorter screws than the rest.

Some of these are captive screws and cannot be removed.

Step 3

  • Remove the backside by sliding the plastic spudger across the seam.
  • There are loose parts that can fall out. Take these off and put them aside.

Remove the backside by sliding the plastic spudger across the seam.

There are loose parts that can fall out. Take these off and put them aside.

Step 4

  • Separate the trigger mechanism from the barrel.

Separate the trigger mechanism from the barrel.

Step 5

  • Remove the plunger springs from the mechanism by pulling one of the springs back then bending it off the connection.
  • These are tricky to remove, so be careful when pulling them off.

Remove the plunger springs from the mechanism by pulling one of the springs back then bending it off the connection.

These are tricky to remove, so be careful when pulling them off.

Step 6

  • Now pull the springs out and add new ones.
  • There are a few pieces with springs that can misalign in reassembly. Keep in mind where they are.

Now pull the springs out and add new ones.

There are a few pieces with springs that can misalign in reassembly. Keep in mind where they are.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 3 other contributors 


                    Levi Rushing

Member since: 09/08/2021

148 Reputation

                                      1 Guide authored                  



                       Badges:
                       4







                                                        +1 more badge

Team

                       Embry-Riddle Aeronautical University, Team 1-4, Rauch Fall 2021                        

                                                  Member of Embry-Riddle Aeronautical University, Team 1-4, Rauch Fall 2021 



                    ERAU-RAUCH-F21S1G4                     


                                            3 Members                     


                                            1 Guide authored