Difficulty
Moderate
Steps
8
Time Required
Suggest a time??
Sections
2
- Nerf N-Strike Elite Retaliator Case Disassembly
- 5 steps
- Air Chamber Assembly
- 3 steps
Flags
1
Needs More Images
A few more images would make this guide’s procedures crystal clear.
BackNerf N-Strike Elite Retaliator
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Case Disassembly
- While holding the blaster, rotate the barrel assembly in the counter-clockwise direction and pull away from the blaster.
While holding the blaster, rotate the barrel assembly in the counter-clockwise direction and pull away from the blaster.
1024
Step 2
- Remove the stock of the blaster by pushing the orange tabs downward while pulling the stock away from the blaster.
Remove the stock of the blaster by pushing the orange tabs downward while pulling the stock away from the blaster.
Step 3
- Remove the magazine from the blaster by forcing the sliding mechanism backwards, pushing the orange tabs downward, and pulling the magazine away.
Remove the magazine from the blaster by forcing the sliding mechanism backwards, pushing the orange tabs downward, and pulling the magazine away.
Step 4
- Remove the stock attachment point by removing the two 8mm Phillips head screws.
Remove the stock attachment point by removing the two 8mm Phillips head screws.
Step 5
- Remove the eleven 8mm and two 10mm Phillips head screws from the left side of the blaster, and carefully remove the outer casing.
- Two of the screws must be removed with the sliding mechanism in the forward position. Another two must be removed with the sliding mechanism in the back position.
- There are several springs that may become displaced during this procedure. Proceed with the utmost caution.
Remove the eleven 8mm and two 10mm Phillips head screws from the left side of the blaster, and carefully remove the outer casing.
Two of the screws must be removed with the sliding mechanism in the forward position. Another two must be removed with the sliding mechanism in the back position.
There are several springs that may become displaced during this procedure. Proceed with the utmost caution.
Step 6
Air Chamber
- The firing spring may be energized. If so, carefully release and spring pressure before proceeding.
- While holding down the white air chamber, pull the firing spring backwards to remove it from the blaster.
The firing spring may be energized. If so, carefully release and spring pressure before proceeding.
While holding down the white air chamber, pull the firing spring backwards to remove it from the blaster.
Step 7
- Slide the white air chamber forward and remove the white alignment bracket.
Slide the white air chamber forward and remove the white alignment bracket.
Step 8
- Remove white air chamber by depressing the orange trigger apparatus and pulling backwards off of the barrel.
Remove white air chamber by depressing the orange trigger apparatus and pulling backwards off of the barrel.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
15 other people completed this guide.
Author
with 5 other contributors
ericharman
Member since: 03/02/2016
1,380 Reputation
5 Guides authored
Badges:
20
+17 more badges
Albert Einstein - Jan 6, 2018
Reply
Where did we found the pièces??
sabeni83_king - Jun 25, 2018
Reply
where i can buy for spare part “air chamber”?
Daniel MacDonald - Jul 26, 2019
Reply
this tutorial helped A LOT
camper234 - May 3, 2020
Reply
OK I’ve removed the air chamber now what?