Nerf N Strike Elite Alpha Trooper Cs 12 Barrel Replacement Repair Guide

Difficulty

Moderate

Steps

7

Time Required

                          20 - 30 minutes            

Sections

1

• Barrel
• 7 steps

Flags

0

• BackNerf N-Strike Elite Alpha Trooper CS-12

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Rear Cap Removal               

• Looking from the rear of the rifle, remove the two 10 mm phillips screws holding the orange cap to the butt of the rifle.
• Pull off the orange cap.

Looking from the rear of the rifle, remove the two 10 mm phillips screws holding the orange cap to the butt of the rifle.

Pull off the orange cap.

1024

Step 2

              Slide Removal               

• With the rifle barrel pointing left, remove the two 8 mm phillips screws holding the slide mechanism together.
• Remove the three 10 mm phillips screws from the bottom of the slide mechanism.
• Separate and remove the two halves of the slide mechanism.
• Make sure to keep track of which screws correspond to which holes.

With the rifle barrel pointing left, remove the two 8 mm phillips screws holding the slide mechanism together.

Remove the three 10 mm phillips screws from the bottom of the slide mechanism.

Separate and remove the two halves of the slide mechanism.

Make sure to keep track of which screws correspond to which holes.

Step 3

• Again with the rifle barrel pointing left, remove the fourteen 10 mm phillips screws from the main body of the rifle.
• Remove the two 5 mm phillips screws from the main body.
• Remove the two 8 mm phillips screws from the main body.
• Screws are varying lengths, make sure to keep track of which screws correspond to which holes.

Again with the rifle barrel pointing left, remove the fourteen 10 mm phillips screws from the main body of the rifle.

Remove the two 5 mm phillips screws from the main body.

Remove the two 8 mm phillips screws from the main body.

Screws are varying lengths, make sure to keep track of which screws correspond to which holes.

Step 4

• Pull the two halves of the rifle apart.
• Be careful of the spring at the rear end of the rifle. It may come flying out.
• If you have difficulty pulling the two halves apart, use a spudger to gently pry the edges of the body apart.
• Also be careful of small parts when opening the gun, they may be easy to lose.
• Remove the access gate and barrel cover.

Pull the two halves of the rifle apart.

Be careful of the spring at the rear end of the rifle. It may come flying out.

If you have difficulty pulling the two halves apart, use a spudger to gently pry the edges of the body apart.

Also be careful of small parts when opening the gun, they may be easy to lose.

Remove the access gate and barrel cover.

Step 5

• Remove the two 5mm phillips screws from the rifle muzzle.

Remove the two 5mm phillips screws from the rifle muzzle.

Step 6

• Remove the muzzle and barrel from the rifle body.

Remove the muzzle and barrel from the rifle body.

Step 7

• Separate the muzzle from the barrel.

Separate the muzzle from the barrel.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 4 other contributors 

                    Elizabeth Coffey                     

Member since: 01/26/2014

404 Reputation

                                      3 Guides authored                  



                       Badges:
                       8







                                                        +5 more badges                           

Team

                       Cal Poly, Team 10-35, Maness Winter 2014                        

                                                  Member of Cal Poly, Team 10-35, Maness Winter 2014 



                    CPSU-MANESS-W14S10G35                     


                                            4 Members                     


                                            5 Guides authored