Difficulty
Moderate
Steps
10
Time Required
35 minutes
Sections
1
- Light-bulb Lens
- 10 steps
Flags
0
BackNerf N-Strike Deploy CS-6
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Light-bulb Lens
- Proceed to take out the hidden screws when the device is collapsed.
- Hidden screws measure out to 1.7 cm
Proceed to take out the hidden screws when the device is collapsed.
Hidden screws measure out to 1.7 cm
1024
Step 2
- Once the hidden screws are out, extend your device in stealth mode.
- Once the device is extended out, proceed to take out the necessary screws as shown.
- For the pump, the screw’s length extends out to 1.9 cm. The majority size of the screws extend out to 1.3 cm.
Once the hidden screws are out, extend your device in stealth mode.
Once the device is extended out, proceed to take out the necessary screws as shown.
For the pump, the screw’s length extends out to 1.9 cm. The majority size of the screws extend out to 1.3 cm.
Step 3
- Once all the necessary screws are taken off, the interior of your device should be visible.
- Unscrew the orange barrel located in front of your device.
Once all the necessary screws are taken off, the interior of your device should be visible.
Unscrew the orange barrel located in front of your device.
Step 4
- Now that the cover is off and the screws are out, pry off the barrel of the device.
Now that the cover is off and the screws are out, pry off the barrel of the device.
Step 5
- Once the orange barrel of the device has been pried off, proceed to take the metal clip off from where it is currently located.
Once the orange barrel of the device has been pried off, proceed to take the metal clip off from where it is currently located.
Step 6
- As shown, use your Phillips #0 head screwdriver to unscrew the highlighted areas
As shown, use your Phillips #0 head screwdriver to unscrew the highlighted areas
Step 7
- Once all the screws have been removed, the cover for the light-bulb is able to come off.
- Gently remove the cover to maintain the safety of your device.
Once all the screws have been removed, the cover for the light-bulb is able to come off.
Gently remove the cover to maintain the safety of your device.
Step 8
- When taking off the cover piece, gently place it above the device as shown.
- Regarding the ligh-bulb cords, it should have a strip of tape to keep it down.
When taking off the cover piece, gently place it above the device as shown.
Regarding the ligh-bulb cords, it should have a strip of tape to keep it down.
Step 9
- Near the light-bulb is the lens. Gently pry it off.
- Correctly dispose your damaged lens.
Near the light-bulb is the lens. Gently pry it off.
Correctly dispose your damaged lens.
Step 10
- Once you acquire your new lens, gently place it in front of the bulb.
- As shown, the lens should be placed where the edges line up.
Once you acquire your new lens, gently place it in front of the bulb.
As shown, the lens should be placed where the edges line up.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 2 other contributors
Alec Hernandez
Member since: 09/28/2016
126 Reputation
2 Guides authored
Badges:
7
+4 more badges
Team
Eastern Washington University, Team 2-5, Mathisen Fall 2016
Member of Eastern Washington University, Team 2-5, Mathisen Fall 2016
EWU-MATHISEN-F16S2G5
4 Members
4 Guides authored