Difficulty

Moderate

Steps

8

Time Required

                          10 minutes

Sections

2

  • Back Panel
  • 4 steps
  • Wire
  • 4 steps

Flags

3

Bullets!

Better coordination with markups and the color/type of bullets will help make this guide more clear!

Step Trimmer

This guide has unnecessary steps. Trim them to be more concise!

Better Introduction

Improve this guide by completing or revising its introduction.

  • BackNeo3DO

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

What you need

Step 1

              Back Panel
  • Turn the Neo3DO face down so that the logo is facing toward you.
  • Insert the plastic opening tool between the metal frame and the plastic back panel, as shown.

Turn the Neo3DO face down so that the logo is facing toward you.

Insert the plastic opening tool between the metal frame and the plastic back panel, as shown.

1024

Step 2

  • Gently pry the back panel upwards.
  • Ensure the tool does not slip into the device and damage the internals.

Gently pry the back panel upwards.

Ensure the tool does not slip into the device and damage the internals.

Step 3

  • Once the back panel has been pried away from the bottom and sides of the Neo3DO, lift the back panel up and away from the tablet.

Once the back panel has been pried away from the bottom and sides of the Neo3DO, lift the back panel up and away from the tablet.

Step 4

  • When replacing the back panel, place the top edge of the back panel against the top edge of the Neo3DO, as shown.
  • The top edge of the device is the edge closest to the camera. The top of the back panel is the side with the hole for the camera.

When replacing the back panel, place the top edge of the back panel against the top edge of the Neo3DO, as shown.

The top edge of the device is the edge closest to the camera. The top of the back panel is the side with the hole for the camera.

Step 5

              Wire
  • Starting with an open back panel, take your tweezers and use them to pull back the black tabs on the connector.

Starting with an open back panel, take your tweezers and use them to pull back the black tabs on the connector.

Step 6

  • Pull the wire completely from the socket.
  • Check the metallic parts for signs of damage or corrosion. If either exists, you might need to replace the battery entirely.

Pull the wire completely from the socket.

Check the metallic parts for signs of damage or corrosion. If either exists, you might need to replace the battery entirely.

Step 7

  • Re-insert the wire into the socket.

Re-insert the wire into the socket.

Step 8

  • Using the tweezers, push the black tabs back in.

Using the tweezers, push the black tabs back in.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 2 other contributors 


                    Michael Whitehead

Member since: 09/26/2016

201 Reputation

                                      2 Guides authored                  



                       Badges:
                       5







                                                        +2 more badges

Team

                       USF Tampa, Team 14-3, Eyestone Fall 2016                        

                                                  Member of USF Tampa, Team 14-3, Eyestone Fall 2016 



                    USFT-EYESTONE-F16S14G3                     


                                            3 Members                     


                                            12 Guides authored