Difficulty
Easy
Steps
5
Time Required
5 - 10 minutes
Sections
1
- Necklace Chain Repair
- 5 steps
Flags
0
BackJewelry
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Necklace Chain Repair
- Look closely at where the necklace chain came apart. You will see a split ring, otherwise known as a jump ring.
- Figure A: The jump ring is located on one end of the necklace.
Look closely at where the necklace chain came apart. You will see a split ring, otherwise known as a jump ring.
Figure A: The jump ring is located on one end of the necklace.
1024
Step 2
- Figures B and C: While holding the needle nose pliers in one hand, clamp onto one end of the jump ring and hold on to the other end with your thumb and index finger.
- Carefully pull on the ends of the jump ring until the opening is large enough to accommodate one of the chain links.
- Warning: Do not separate the jump ring ends too far apart, otherwise damage to the jump ring may occur.
Figures B and C: While holding the needle nose pliers in one hand, clamp onto one end of the jump ring and hold on to the other end with your thumb and index finger.
Carefully pull on the ends of the jump ring until the opening is large enough to accommodate one of the chain links.
Warning: Do not separate the jump ring ends too far apart, otherwise damage to the jump ring may occur.
Step 3
- Now that the jump ring opening is separated, you can reattach the chain. Find the end of the chain that had detached from the necklace.
- Figures D and E: While holding the jump ring in one hand and the end of the necklace in your other hand, proceed to loop the chain into the opened jump ring.
Now that the jump ring opening is separated, you can reattach the chain. Find the end of the chain that had detached from the necklace.
Figures D and E: While holding the jump ring in one hand and the end of the necklace in your other hand, proceed to loop the chain into the opened jump ring.
Step 4
- Figure F: Using similar methods from Step 2 Figure C, clamp onto one end of the jump ring slit with your pliers and hold on to the other end with your thumb and index finger.
- Carefully close the opening of the jump ring.
Figure F: Using similar methods from Step 2 Figure C, clamp onto one end of the jump ring slit with your pliers and hold on to the other end with your thumb and index finger.
Carefully close the opening of the jump ring.
Step 5
- Figure G: It is time to close the jump ring. With your pliers, clamp on both ends of the jump ring and push together so the two ends of the jump ring slightly overlap.
- Refer to Figure H for finished assembly.
Figure G: It is time to close the jump ring. With your pliers, clamp on both ends of the jump ring and push together so the two ends of the jump ring slightly overlap.
Refer to Figure H for finished assembly.
To make sure the necklace is correctly reattached, gently pull on the chain. The jump ring should be firmly closed as to prevent the chain from slipping off the jump ring.
Cancel: I did not complete this guide.
5 other people completed this guide.
Author
with 5 other contributors
Stephanie Lascola
Member since: 04/09/2015
361 Reputation
1 Guide authored
Badges:
6
+3 more badges
Team
Cal Poly, Team 28-4, Green Spring 2015
Member of Cal Poly, Team 28-4, Green Spring 2015
CPSU-GREEN-S15S28G4
6 Members
12 Guides authored