Difficulty
Moderate
Steps
11
Time Required
1 hour
Sections
1
- Dismantling
- 11 steps
Flags
2
In Progress
This guide is a work in progress. Reload periodically to see the latest changes!
Member-Contributed Guide
An awesome member of our community made this guide. It is not managed by iFixit staff.
BackNEC VT570
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Step 1
Removing lamp
- Turn the projector upside down.
- Remove the lamp small plastic cover.
- Unsrew two srews and put out the lamp.
Turn the projector upside down.
Remove the lamp small plastic cover.
Unsrew two srews and put out the lamp.
1024
Step 2
Removing buttom plastic cover
- Remove the rest of the srews from the bottom.
- Remove the plastic buttom cover.
Remove the rest of the srews from the bottom.
Remove the plastic buttom cover.
Step 3
Removing motherboard
- Unscrew four screws.
- Detached plugged cables marked with green squares.
- Remove motherboard.
Unscrew four screws.
Detached plugged cables marked with green squares.
Remove motherboard.
Step 4
Removing main (larger) fan
- Unscrew all the screws marked on the pictures and remove the small backplate.
- Pull out the fan.
Unscrew all the screws marked on the pictures and remove the small backplate.
Pull out the fan.
Step 5
Removing mirrors and filters
- Remove screws Green are screws that are not seen in the picture.
- After removing the top cover there are more screws
- Remove four lances
Remove screws Green are screws that are not seen in the picture.
After removing the top cover there are more screws
Remove four lances
Step 6
Removing main lans
- After 5th step, you can just pull out the main lens.
After 5th step, you can just pull out the main lens.
Step 7
Removing electricity part 1/2
- Unsrew screws (blue), green screw is a bit hidden.
- Remove upper backplate.
- Unscrew the connector and pull it out.
- To pull the electricity part we should remove other parts first since they stick to cables connected to other modules.
Unsrew screws (blue), green screw is a bit hidden.
Remove upper backplate.
Unscrew the connector and pull it out.
To pull the electricity part we should remove other parts first since they stick to cables connected to other modules.
Step 8
Removing lence housing
- Remove screws.
- Take out the lens housing. Inside the lens housing are several small mirrors so be careful they don’t fall out and brake.
Remove screws.
Take out the lens housing. Inside the lens housing are several small mirrors so be careful they don’t fall out and brake.
Step 9
Removing electricity part 2/2
- Remove screws.
- Green marked screw is a bit hidden inside the case.
- Unplug the side cable and you can take out the module.
- Once the module is partly outside you can open the iron frame and unplug the other two black cables plugs into this module from each side.
Green marked screw is a bit hidden inside the case.
Unplug the side cable and you can take out the module.
Once the module is partly outside you can open the iron frame and unplug the other two black cables plugs into this module from each side.
Step 10
Removing filter and fan module
- Remove marked screws. Green is not seen in the picture but it is there.
- Remove the plastic cover and you’ll find a big fan under it.
- Now you can pull out the big fan together with the electrical module 1.
Remove marked screws. Green is not seen in the picture but it is there.
Remove the plastic cover and you’ll find a big fan under it.
Now you can pull out the big fan together with the electrical module 1.
Step 11
Removing last fan
- Remove the screws and we can pull down the fan cover and fan.
Remove the screws and we can pull down the fan cover and fan.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
Klemen Hodžić
Member since: 11/01/2020
222 Reputation
3 Guides authored
Badges:
2
