Difficulty

Easy

Steps

10

Time Required

                          15 - 30 minutes

Sections

1

  • NEC Turbo Express Disassembly
  • 10 steps

Flags

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

  • BackNEC Turbo Express

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Separate front/rear shells
  • Remove battery cover
  • Remove 6 PH0 screws
  • Do not attempt to separate the two halves
  • Disconnect the 2 FFC ribbon cables and wire connector
  • There’s another ribbon cable, not shown in photo, next to the white one
  • You can now separate the two halves

Remove battery cover

Remove 6 PH0 screws

Do not attempt to separate the two halves

Disconnect the 2 FFC ribbon cables and wire connector

There’s another ribbon cable, not shown in photo, next to the white one

You can now separate the two halves

1024

Step 2

              Disconnect TV tuner FFC cable
  • Disconnect FFC ribbon cable

Disconnect FFC ribbon cable

Step 3

              Remove TV Tuner Port
  • With a pair of tweezers, pinch the retaining tabs inward and push through the shell
  • This can be done with the rear motherboard still in place.

With a pair of tweezers, pinch the retaining tabs inward and push through the shell

This can be done with the rear motherboard still in place.

Step 4

              Disconnect battery cable
  • Disconnect cable

Disconnect cable

Step 5

              Disconnect battery cable
  • Remove tape
  • Keep it close to reuse during reassembly

Remove tape

Keep it close to reuse during reassembly

Step 6

              Remove rear PCB
  • Remove PH0 screw
  • Gently lift the PCB up
  • Remove 3 PH2 screws
  • You can now remove the entire rear PCB

Remove PH0 screw

Gently lift the PCB up

Remove 3 PH2 screws

You can now remove the entire rear PCB

Step 7

              Disconnect speaker
  • Disconnect wire plug

Disconnect wire plug

Step 8

              Remove front PCB
  • Remove 3 PH0 screws
  • You can now remove the front PCB

Remove 3 PH0 screws

You can now remove the front PCB

Step 9

              Remove speaker
  • Remove 2 PH0 screws
  • You can now remove the speaker

Remove 2 PH0 screws

You can now remove the speaker

Step 10

              Remove screen
  • Remove 4 PH0 screws
  • You can now remove the screen

Remove 4 PH0 screws

You can now remove the screen

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 1 other contributor 


                    Navy Vet 2015

Member since: 06/25/2015

6,691 Reputation

                                      14 Guides authored                  



                       Badges:
                       28







                                                        +25 more badges