Difficulty
Easy
Steps
4
Time Required
15 minutes
Sections
1
- Brushes
- 4 steps
Flags
0
BackNeato Botvac D8000
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
Here are step by step instructions in how to get to the brushes.
What you need
Step 1
Brushes
- Place the vacuum on its back so the brushes are visible.
Place the vacuum on its back so the brushes are visible.
1024
Step 2
- Remove the four 10 mm screws with a Torx T10 screwdriver.
Remove the four 10 mm screws with a Torx T10 screwdriver.
Step 3
- Remove the rotary brush simply by grabbing it firmly and pulling it off.
- Once you have removed your rotary brush and 4 bolts, you can easy remove the brush guard.
Remove the rotary brush simply by grabbing it firmly and pulling it off.
Once you have removed your rotary brush and 4 bolts, you can easy remove the brush guard.
Step 4
- Remove the brush by simply pulling it out.
- From there you can clean it or replace the brush with a new one.
Remove the brush by simply pulling it out.
From there you can clean it or replace the brush with a new one.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 1 other contributor
Yeritza Quiroz
Member since: 03/22/2018
159 Reputation
1 Guide authored
Badges:
2
Team
Sam Houston State, Team S17-G6, Blackburne Spring 2018
Member of Sam Houston State, Team S17-G6, Blackburne Spring 2018
SHSU-BLACKBURNE-S18S17G6
4 Members
10 Guides authored