Difficulty
Easy
Steps
3
Time Required
15 minutes
Sections
1
- Battery
- 3 steps
Flags
0
BackNeato Botvac 80
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Loosening screws
- First, open the bin compartment and flip the switch to the off position.
- Once you have done this, flip the robot over. Loosen the 2 screws, and lift the flap off
- You will need to remove the 22.5mm bolts with a J1 Torx screwdriver.
- Screws cannot be removed from the cover.
First, open the bin compartment and flip the switch to the off position.
Once you have done this, flip the robot over. Loosen the 2 screws, and lift the flap off
You will need to remove the 22.5mm bolts with a J1 Torx screwdriver.
Screws cannot be removed from the cover.
1024
Step 2
Remove battery cover
- Gently lift to remove battery cover.
Gently lift to remove battery cover.
Step 3
Removing battery
- Locate battery clip.
- Press down on latch with thumb and slide clip back.
- Remove the battery.
Locate battery clip.
Press down on latch with thumb and slide clip back.
Remove the battery.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 6 other contributors
Alexander Silfa
Member since: 02/02/2017
300 Reputation
1 Guide authored
Badges:
6
+3 more badges
Team
USF Tampa, Team 17-5, Blackwell Spring 2017
Member of USF Tampa, Team 17-5, Blackwell Spring 2017
USFT-BLACKWELL-S17S17G5
3 Members
12 Guides authored
