Difficulty
Very easy
Steps
11
Time Required
5 minutes
Sections
2
- Front Panel Assembly
- 7 steps
- Charging Connector
- 4 steps
Flags
Bullets!
Better coordination with markups and the color/type of bullets will help make this guide more clear!
Confusing Text
Some of this guide’s text is confusing, duplicated, or off-topic. Clarify it by editing!
BackNabi DreamTab HD8
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Front Panel Assembly
- Position the Nabi DreamTab onto a non-metallic surface so that the screen is facing towards the ceiling, and the DreamTab logo appears closest to you.
- Remove the red silicone case from the Nabi DreamTab HD8.
- These steps are specific to the included manufacturer case. If you have a different protective case, please refer to the respective manual for removal.
Position the Nabi DreamTab onto a non-metallic surface so that the screen is facing towards the ceiling, and the DreamTab logo appears closest to you.
Remove the red silicone case from the Nabi DreamTab HD8.
These steps are specific to the included manufacturer case. If you have a different protective case, please refer to the respective manual for removal.
1024
Step 2
- Turn it upside down, ensuring the small black circular camera is in the upper left hand corner.
- Proceeding beyond here will void the manufacturer’s warranty. If you wish to continue, follow these steps carefully.
Turn it upside down, ensuring the small black circular camera is in the upper left hand corner.
Proceeding beyond here will void the manufacturer’s warranty. If you wish to continue, follow these steps carefully.
Step 3
- Remove the six 2.5 mm JIS #000 screws attaching the custom grid to the back panel.
Remove the six 2.5 mm JIS #000 screws attaching the custom grid to the back panel.
Step 4
- Grasp one of the protruding squares and gently lift off the back plate. Place it aside for later reassembly.
- This piece should come off very easily. If you have trouble removing it, all of the screws may not be completely removed. Check and proceed.
- Do not confuse the golden threads for screws.
Grasp one of the protruding squares and gently lift off the back plate. Place it aside for later reassembly.
This piece should come off very easily. If you have trouble removing it, all of the screws may not be completely removed. Check and proceed.
Do not confuse the golden threads for screws.
Step 5
- Remove the three 3.5mm screws using the J-0 screwdriver attaching the back panel to the device.
Remove the three 3.5mm screws using the J-0 screwdriver attaching the back panel to the device.
Step 6
- Rotate the top of the device towards you so that the audio jack appears on the right side of the device.
- The audio jack will have a small symbol of headphones next to a small 3.5mm diameter hole.
- Wedge the plastic opening tool between where the front and back case panels meet near the audio jack.
- Pry the device open using moderate force until you hear a clicking sound. This is the sound of the clips unlocking.
- Move along the perimeter of the entire device using the same prying motion to gradually separate the front and back panels.
- Once the edges are open return to the same starting position next to the audio jack.
- During this step, you may crack some parts of the case. Gently pry around the speakers, audio jack and charging cable ports to reduce this damage.
Rotate the top of the device towards you so that the audio jack appears on the right side of the device.
The audio jack will have a small symbol of headphones next to a small 3.5mm diameter hole.
Wedge the plastic opening tool between where the front and back case panels meet near the audio jack.
Pry the device open using moderate force until you hear a clicking sound. This is the sound of the clips unlocking.
Move along the perimeter of the entire device using the same prying motion to gradually separate the front and back panels.
Once the edges are open return to the same starting position next to the audio jack.
During this step, you may crack some parts of the case. Gently pry around the speakers, audio jack and charging cable ports to reduce this damage.
Step 7
- Once you’ve completed separating the front and back panels, place the device back onto the table, display facing downward and camera at the top left.
- Lift off the back panel and rotate the device 180 degrees while the screen is facing down.
Once you’ve completed separating the front and back panels, place the device back onto the table, display facing downward and camera at the top left.
Lift off the back panel and rotate the device 180 degrees while the screen is facing down.
Step 8
Charging Connector
- Peel off the yellow tape on the connector from the corner.
Peel off the yellow tape on the connector from the corner.
Step 9
- Disengage the white lock keeping the plastic ribbon in place.
Disengage the white lock keeping the plastic ribbon in place.
Step 10
- Remove four screws from the charging connector.
- Silvers screws should be removed before all the other ones.
Remove four screws from the charging connector.
Silvers screws should be removed before all the other ones.
Step 11
- Lift off gently with tweezers.
Lift off gently with tweezers.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 4 other contributors
Kimberly Rios
Member since: 10/01/2015
104 Reputation
1 Guide authored
Badges:
6
+3 more badges
Team
CSU Fullerton, Team 2-3, Bruce Fall 2015
Member of CSU Fullerton, Team 2-3, Bruce Fall 2015
CSUF-BRUCE-F15S2G3
4 Members
10 Guides authored
saif-a1991 - Jan 28, 2019
Reply
hi,
I would like to buy new E237212 but I can’t find it..can you help me?
