Nabi 2S Battery Replacement Repair Guide

Difficulty

Very easy

Steps

Time Required

                          5 minutes

Sections

Nabi 2S Disassembly
4 steps
Battery
2 steps

Flags

BackNabi 2S
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Nabi 2S Disassembly

Remove the red rubber case from the device.

Remove the red rubber case from the device.

1024

Step 2

Make sure the screen is facing away from you and the back cover is facing you.
Using a Phillips #0 Screwdriver, unscrew the 3mm screws counter-clockwise in each corner of the plastic back cover. It will be a total of four screws. The smaller case on the back cover is attached to the main cover so it will not need to be removed.

Make sure the screen is facing away from you and the back cover is facing you.

Using a Phillips #0 Screwdriver, unscrew the 3mm screws counter-clockwise in each corner of the plastic back cover. It will be a total of four screws. The smaller case on the back cover is attached to the main cover so it will not need to be removed.

Step 3

Using the plastic opening tool, remove the case.
Removing the case will take a bit of effort and force. We recommend using two hands and if possible another person to help. It will require some gusto.
It is helpful to pry at the corners first to loosen the case.

Using the plastic opening tool, remove the case.

Removing the case will take a bit of effort and force. We recommend using two hands and if possible another person to help. It will require some gusto.

It is helpful to pry at the corners first to loosen the case.

Step 4

After the back case is loosened, remove it from the device to change or access the battery.

After the back case is loosened, remove it from the device to change or access the battery.

Step 5

              Battery

Grasp the circuit connected to the battery via wires.
Slide the wires from the circuit to detach it.

Grasp the circuit connected to the battery via wires.

Slide the wires from the circuit to detach it.

Step 6

After the circuit is detached, the battery will be easily removable.
Don’t rip the battery off of the board.
The battery is stuck with adhesive tape to the board.
Use a plastic opening tool to apply pressure to the battery and lift it up from the adhesive.

After the circuit is detached, the battery will be easily removable.

Don’t rip the battery off of the board.

The battery is stuck with adhesive tape to the board.

Use a plastic opening tool to apply pressure to the battery and lift it up from the adhesive.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      4 other people completed this guide.

Author

                                      with 2 other contributors

                    Riana Ramirez

Member since: 03/07/2016

680 Reputation

                                      4 Guides authored                  



                       Badges:
                       13







                                                        +10 more badges

Team

                       Marist, Team 1-4, Laflen Spring 2016                        

                                                  Member of Marist, Team 1-4, Laflen Spring 2016 



                    MARS-LAFLEN-S16S1G4                     


                                            2 Members                     


                                            10 Guides authored

Introduction#

What you need#

Team#

Introduction

What you need

Team