Difficulty

Difficult

Steps

6

Time Required

                          30 - 45 minutes

Sections

2

  • Nabi 2 Back Cover Removal
  • 3 steps
  • Internal Speakers
  • 3 steps

Flags

1

Action Shots

Be an action hero! This guide needs images that better demonstrate how to perform specific actions.

  • BackNabi 2

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Nabi 2 Back Cover Removal
  • Remove the rubber bumper from the tablet.

Remove the rubber bumper from the tablet.

1024

Step 2

  • With a PH00 screwdriver, remove the four outermost screws from the back of the tablet.

With a PH00 screwdriver, remove the four outermost screws from the back of the tablet.

Step 3

  • Carefully, insert a plastic opening tool into the seam of the device and begin gently prying the two plastic pieces apart.
  • Work the tool all the way around the device. Small plastic clips should release. If they do not, gently apply outwards pressure until the clips give.
  • Do not force the clips open, as they are fairly easy to break

Carefully, insert a plastic opening tool into the seam of the device and begin gently prying the two plastic pieces apart.

Work the tool all the way around the device. Small plastic clips should release. If they do not, gently apply outwards pressure until the clips give.

Do not force the clips open, as they are fairly easy to break

Step 4

              Internal Speakers
  • Using the soldering iron, detach the speaker’s wires from the circuit board.

Using the soldering iron, detach the speaker’s wires from the circuit board.

Step 5

  • Using a Phillips PH 000 screwdriver, unscrew the two 3 mm Phillips #000 screws on each side of the speakers that hold the speakers in place.

Using a Phillips PH 000 screwdriver, unscrew the two 3 mm Phillips #000 screws on each side of the speakers that hold the speakers in place.

Step 6

  • Once the screws have been removed, remove the speakers from the device.

Once the screws have been removed, remove the speakers from the device.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors 


                    Michelle

Member since: 02/09/2016

851 Reputation

                                      4 Guides authored                  



                       Badges:
                       18







                                                        +15 more badges

Team

                       USF Tampa, Team 4-3, Lacy Spring 2016                        

                                                  Member of USF Tampa, Team 4-3, Lacy Spring 2016 



                    USFT-LACY-S16S4G3                     


                                            4 Members                     


                                            14 Guides authored