Difficulty

Easy

Steps

4

Time Required

                          5 minutes

Sections

1

  • N131WU Laptop Access to main components
  • 4 steps

Flags

3

Bullets!

Better coordination with markups and the color/type of bullets will help make this guide more clear!

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

Better Introduction

Improve this guide by completing or revising its introduction.

  • Backwhy! (Eluktronics) N131WU Laptop

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

What you need

Step 1

              Remove the Screws
  • Remove the case screws (red) and the keyboard screws (green).
  • Be sure not to lose these screws. You will need them to reassemble your laptop.

Remove the case screws (red) and the keyboard screws (green).

Be sure not to lose these screws. You will need them to reassemble your laptop.

1024

Step 2

              Remove the Keyboard
  • Using the hole provided under the case (see picture), push the keyboard out using a thin screwdriver or some other solid object.
  • Hold onto the keyboard as you push the keyboard so as not to damage the two cables still attached.

Using the hole provided under the case (see picture), push the keyboard out using a thin screwdriver or some other solid object.

Hold onto the keyboard as you push the keyboard so as not to damage the two cables still attached.

Step 3

              Remove Keyboard Connections
  • (Blue Cable) Push up on the thin black portion on the connector and gently pull out the blue ribbon cable until it comes out.
  • (Orange Cable) Remove the orange cable by sliding the gray part of the connector towards the screen, then gently pull on the ribbon cable.

(Blue Cable) Push up on the thin black portion on the connector and gently pull out the blue ribbon cable until it comes out.

(Orange Cable) Remove the orange cable by sliding the gray part of the connector towards the screen, then gently pull on the ribbon cable.

Step 4

              Remove the upper screws
  • Unscrew the three screws that were under the keyboard. Be sure to hold onto these.
  • After these are removed, you can now remove the lower part of the case from the rest of the computer.

Unscrew the three screws that were under the keyboard. Be sure to hold onto these.

After these are removed, you can now remove the lower part of the case from the rest of the computer.

To reassemble your laptop, follow the instructions in reverse.

Cancel: I did not complete this guide.

                                                                                      6 other people completed this guide.                                             


        These translators are helping us fix the world!      Want to contribute?      Start translating ›

Special thanks to these translators:

100%

Iain

Annika Faelker

oldturkey03

Jerry W

Author

                                      with 4 other contributors 


                    Felice Suglia

Member since: 06/15/2013

28,552 Reputation

                                      243 Guides authored                  



                       Badges:
                       20







                                                        +17 more badges

Thomas B - Apr 18, 2019

Reply

Valable aussi pour le portable CLEVO N141ZU

EkimiaMichel - Jun 12, 2019

Merci nous avons ajouté les autres modèles compatibles

Raymond Feix - Oct 24, 2019

Reply

Bonjour MANIP pour sortir clavier, ce dernier ne vient pas ! ça tient par vis centrale VERTE impossible de le sortir sur CLEVO N141ZU précision toutes les vis sont sorties ( 10 rouges et 2 vertes ça retient vers intérieur a moins de tout casser ! ) a plus Merci Raymond Feix

EkimiaMichel - Oct 24, 2019

Si les 2 vertes sont bien retirées , il n y a aucun risque à pousser

Felice Suglia - Oct 24, 2019

Reply

Bonjour, une fois toutes les vis retirées, il faut vraiment appuyer assez fortement pour déclipser le clavier sur un côté. Pour la suite du déclipsage, il faut reprendre délicatement depuis dessus en faisant le tour du clavier depuis la partie déclipsée.

Bonne chance!