Difficulty

Moderate

Steps

4

Time Required

                          10 minutes

Sections

1

  • Trigger
  • 4 steps

Flags

Markup Mishap

This guide needs better markups. Help out by correcting or making some markup annotations.

  • BackNerf N-Strike Nite Finder EX-3

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

==CAUTION==

Be aware of springs under compression. Take care so these small parts do not fly off the blaster and get lost.

What you need

Step 1

              Trigger
  • Place the blaster upside down on the table, and remove the screw in the bottom of the handle.
  • Remove the battery door and take the batteries out.

Place the blaster upside down on the table, and remove the screw in the bottom of the handle.

Remove the battery door and take the batteries out.

1024

Step 2

  • Set the blaster on its side with the screws facing up (the blaster will be placed on its left side). Remove all 14 phillips head, 8.2 mm screws and set them aside.
  • Lift the side of the blaster off exposing its internal parts.

Set the blaster on its side with the screws facing up (the blaster will be placed on its left side). Remove all 14 phillips head, 8.2 mm screws and set them aside.

Lift the side of the blaster off exposing its internal parts.

Step 3

  • Remove the phillips head, 10.2 mm screw holding the trigger in place.

Remove the phillips head, 10.2 mm screw holding the trigger in place.

Step 4

  • Remove the trigger by pulling the piece straight up.
  • Caution: Do not let the spring fly off the spring

Remove the trigger by pulling the piece straight up.

Caution: Do not let the spring fly off the spring

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 3 other contributors 


                    Kyle Schober

Member since: 02/24/2014

640 Reputation

                                      5 Guides authored                  



                       Badges:
                       14







                                                        +11 more badges

Team

                       Michigan Tech, Team 5-8, Lauer Spring 2014                        

                                                  Member of Michigan Tech, Team 5-8, Lauer Spring 2014 



                    MTU-LAUER-S14S5G8                     


                                            3 Members                     


                                            13 Guides authored