Musicangel Jh Md04E2 Wired Speakers Disassembly Repair Guide

Difficulty

Very easy

Steps

5

Time Required

                          5 minutes            

Sections

1

• MusicAngel JH-MD04E2 wired speakers Disassembly
• 5 steps

Flags

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

• BackMusicAngel wired speakers

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

I decided to take it apart to create this guide and see what makes it tick.

What you need

Step 1

              First assessment               

• Bottom side has 4 5.95mm tapping Phillips #1 screws, under a rubber cover.
• Under the label, there are two more Phillips #1 screws 9.15mm tapping screws.

Bottom side has 4 5.95mm tapping Phillips #1 screws, under a rubber cover.

Under the label, there are two more Phillips #1 screws 9.15mm tapping screws.

1024

Step 2

              Opening the speaker               

• Use a very thin metal prying tool and slide it in between the metal looking grill and the speaker body. Carefully pry it out (no glue is used) all the way around.
• Repeat on both speaker sides.

Use a very thin metal prying tool and slide it in between the metal looking grill and the speaker body. Carefully pry it out (no glue is used) all the way around.

Repeat on both speaker sides.

Step 3

              Taking out the parts               

• Use a spudger to pry the battery that is glued to the top, from the body. Note: This is pretty strong adhesive.
• Tilt the speaker grill / element a little, to slide it through the body.

Use a spudger to pry the battery that is glued to the top, from the body. Note: This is pretty strong adhesive.

Tilt the speaker grill / element a little, to slide it through the body.

Step 4

              Information               

• As you can see, there are no connectors used. All connections are soldered directly to the board.
• No information can be found on the battery, either side.
• The speaker elements are 45mm, 3W and 4Ω

As you can see, there are no connectors used. All connections are soldered directly to the board.

No information can be found on the battery, either side.

The speaker elements are 45mm, 3W and 4Ω

Step 5

              Board overview               

• Not really much going on on this board.

Not really much going on on this board.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.                                             

Author

                                      with 1 other contributor 

                    Geir Ove Andersen                     

Member since: 06/06/2022

6,086 Reputation

                                      5 Guides authored                  



                       Badges:
                       26







                                                        +23 more badges                           

Team

                       Master Techs                        

                                                  Member of Master Techs 



                    Community                     


                                            310 Members                     


                                            1,168 Guides authored