Munchkin Mozart Magic Cube Frame Removal Replacement Repair Guide

Difficulty

Moderate

Steps

8

Time Required

                          5 minutes            

Sections

2

• Face plate
• 7 steps
• Frame Removal
• 1 step

Flags

0

• BackMunchkin Mozart Magic Cube

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Face plate               

• Remove two 6 mm Phillips #2 screws on either side of the On/Off Plate.

Remove two 6 mm Phillips #2 screws on either side of the On/Off Plate.

1024

Step 2

• Remove the On/Off switch plate and save the screws so you can use them later to put the plate back on.

Remove the On/Off switch plate and save the screws so you can use them later to put the plate back on.

Step 3

• Gently pull out the battery cartridge and if needed, replace the batteries with 3 AA alkaline batteries.

Gently pull out the battery cartridge and if needed, replace the batteries with 3 AA alkaline batteries.

Step 4

• Starting with the yellow face, insert the metal spudger between the yellow face and the white frame, prying the frame apart.

Starting with the yellow face, insert the metal spudger between the yellow face and the white frame, prying the frame apart.

Step 5

• Insert the metal spudger in the space created by the plastic opening tool between the frame and face of the cube.
• Pry the cube face from the frame.

Insert the metal spudger in the space created by the plastic opening tool between the frame and face of the cube.

Pry the cube face from the frame.

Step 6

• After removing the square plates, you can unscrew the screws underneath.
• Remove four 6 mm Phillips #2 screws, located on the sides.

After removing the square plates, you can unscrew the screws underneath.

Remove four 6 mm Phillips #2 screws, located on the sides.

Step 7

• Remove the rubber corners by simply pulling them off.

Remove the rubber corners by simply pulling them off.

Step 8

              Frame Removal               

• Remove twenty-four 6 mm Phillips #2 from all 6 sides.
• Once the screws are removed, gently pull apart the frame.

Remove twenty-four 6 mm Phillips #2 from all 6 sides.

Once the screws are removed, gently pull apart the frame.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 3 other contributors 

                    Ibrahim Aldairem                     

Member since: 09/01/2015

335 Reputation

                                      2 Guides authored                  



                       Badges:
                       10







                                                        +7 more badges                           

Team

                       USF Tampa, Team 1-4, Sullivan Fall 2015                        

                                                  Member of USF Tampa, Team 1-4, Sullivan Fall 2015 



                    USFT-SULLIVAN-F15S1G4                     


                                            4 Members                     


                                            7 Guides authored