Difficulty

Moderate

Steps

6

Time Required

                          7 minutes

Sections

2

  • Battery
  • 3 steps
  • RAM
  • 3 steps

Flags

0

  • BackMSI PR600 MS-16372

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • First, turn off the computer and unplug the power cord.
  • If laptop is not unplugged from the power cord, you could be at risk of electric shock.

First, turn off the computer and unplug the power cord.

If laptop is not unplugged from the power cord, you could be at risk of electric shock.

1024

Step 2

  • Flip laptop over so that you are looking at the bottom of the laptop.
  • Put your left pointer finger on the switch labeled “Battery lock” and your right pointer finger on the switch labeled “Release”.

Flip laptop over so that you are looking at the bottom of the laptop.

Put your left pointer finger on the switch labeled “Battery lock” and your right pointer finger on the switch labeled “Release”.

Step 3

  • Switch the tab labeled “Battery lock” to the unlocked position.
  • Slide the tab labeled “Release” to the right and hold it down.
  • While holding the “Release” tab to the right, slide the battery out with your left hand.

Switch the tab labeled “Battery lock” to the unlocked position.

Slide the tab labeled “Release” to the right and hold it down.

While holding the “Release” tab to the right, slide the battery out with your left hand.

Step 4

              RAM
  • Unscrew the four 10 mm Phillips head screws circled in red in the picture using the Phillips 00 screwdriver.

Unscrew the four 10 mm Phillips head screws circled in red in the picture using the Phillips 00 screwdriver.

Step 5

  • Put your pointer finger underneath the tab and lift up to remove the plastic cover.

Put your pointer finger underneath the tab and lift up to remove the plastic cover.

Step 6

  • Slide the RAM off by pulling it away from the fan.
  • Slide RAM back in to serve as a reset.

Slide the RAM off by pulling it away from the fan.

Slide RAM back in to serve as a reset.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 


                    Lauren Mewes

Member since: 10/21/2018

361 Reputation

                                      3 Guides authored                  



                       Badges:
                       5







                                                        +2 more badges

Team

                       UC Davis, Team S4-G8, Lore Fall 2018                        

                                                  Member of UC Davis, Team S4-G8, Lore Fall 2018 



                    UCD-LORE-F18S4G8                     


                                            3 Members                     


                                            3 Guides authored