Difficulty
Easy
Steps
5
Time Required
15 minutes
Sections
1
- Hard Drive and SSD
- 5 steps
Flags
0
BackMSI GT72 2QE Dominator Pro
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Hard Drive and SSD
- Remove the seven 6mm #0 Phillips Head screws on the bottom of the device.
- Remove the bottom to access the inside.
Remove the seven 6mm #0 Phillips Head screws on the bottom of the device.
Remove the bottom to access the inside.
1024
Step 2
- Disconnect the SATA cable from the hard drive.
Disconnect the SATA cable from the hard drive.
Step 3
- Pull out the hard drive.
Pull out the hard drive.
Step 4
- Remove the two 6mm #0 Phillips head screws securing the two SSDs.
Remove the two 6mm #0 Phillips head screws securing the two SSDs.
Step 5
- Pull the SSDs away from its slot.
- Be sure to pull parallel to the PCB. Do not pull upward at an angle.
Pull the SSDs away from its slot.
Be sure to pull parallel to the PCB. Do not pull upward at an angle.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.
Author
with 1 other contributor
Colin Harrop
Member since: 04/20/2017
164 Reputation
1 Guide authored
Badges:
6
+3 more badges
Team
Cal Poly, Team S17-G2, Banghart Spring 2017
Member of Cal Poly, Team S17-G2, Banghart Spring 2017
CPSU-BANGHART-S17S17G2
5 Members
7 Guides authored
rajh - Jul 2, 2019
Reply
Good evening how to get a laptop battery with shipping to Saudi Arabia