Difficulty
Easy
Steps
4
Time Required
5 minutes
Sections
1
- Fans
- 4 steps
Flags
0
BackMSI GT72 2QE Dominator Pro
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Fans
- Remove the seven 6 mm Phillips #00 screws on the back cover of the laptop with the PH0 Bit screwdriver.
- Every screw in this guide can be removed with the same PH0 Bit screwdriver.
Remove the seven 6 mm Phillips #00 screws on the back cover of the laptop with the PH0 Bit screwdriver.
Every screw in this guide can be removed with the same PH0 Bit screwdriver.
1024
Step 2
- Lift the back cover off by lifting by the tab on the bottom of the cover as indicated.
Lift the back cover off by lifting by the tab on the bottom of the cover as indicated.
Step 3
- Detach the two indicated wires by pulling upward on them.
Detach the two indicated wires by pulling upward on them.
Step 4
- Unscrew a total of four 10mm Philips #00 screws (two screws per fan) as indicated.
Unscrew a total of four 10mm Philips #00 screws (two screws per fan) as indicated.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.
Author
with 1 other contributor
Michael Petralia
Member since: 04/18/2017
164 Reputation
1 Guide authored
Badges:
6
+3 more badges
Team
Cal Poly, Team S17-G2, Banghart Spring 2017
Member of Cal Poly, Team S17-G2, Banghart Spring 2017
CPSU-BANGHART-S17S17G2
5 Members
7 Guides authored