Difficulty
Easy
Steps
4
Time Required
5 - 10 minutes
Sections
1
- M.2 SSD
- 4 steps
Flags
0
BackMSI GT62VR 6RD Dominator
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
M.2 SSD
- Remove the six 1.2mm screws on the bottom plate of the laptop using a JIS #0 screwdriver.
Remove the six 1.2mm screws on the bottom plate of the laptop using a JIS #0 screwdriver.
1024
Step 2
- Insert the plastic opening tool into the seam on the backplate of the laptop.
- A popping sound will be produced from your device while you remove the backplate.
- Pry the back plate up.
- Slide the plastic opening tool around the laptop’s edge slowly until the backplate is completely removed.
Insert the plastic opening tool into the seam on the backplate of the laptop.
A popping sound will be produced from your device while you remove the backplate.
Pry the back plate up.
Slide the plastic opening tool around the laptop’s edge slowly until the backplate is completely removed.
Step 3
- Remove the single 1.2mm screw securing the SSD to the laptop using the JIS #0 screwdriver.
Remove the single 1.2mm screw securing the SSD to the laptop using the JIS #0 screwdriver.
Step 4
- Remove the old SSD, then insert and screw in the new one.
Remove the old SSD, then insert and screw in the new one.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 4 other contributors
Matthew Berberich
Member since: 09/18/2018
266 Reputation
1 Guide authored
Badges:
6
+3 more badges
Team
University of North Texas, Team S4-G1, Raign Fall 2018
Member of University of North Texas, Team S4-G1, Raign Fall 2018
UNT-RAIGN-F18S4G1
4 Members
5 Guides authored
Will Rogers - Apr 24, 2019
Reply
Isn’t that an M.2 Drive not a GPU? the GPU is in the top right. under the heat pipes.