Difficulty

Easy

Steps

4

Time Required

                          5 - 10 minutes            

Sections

1

  • Cooling Fan
  • 4 steps

Flags

0

  • BackMSI GT62VR 6RD Dominator

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Cooling Fan               
  • Remove the six 1.2mm screws on the bottom plate of the laptop using a JIS #0 screwdriver.

Remove the six 1.2mm screws on the bottom plate of the laptop using a JIS #0 screwdriver.

1024

Step 2

  • Insert the plastic opening tools into the seam on the back plate of the laptop.
  • A popping sound may come from your device while you remove the backplate.
  • Pry the back plate up.
  • Slide the plastic opening tool around the laptop’s edge slowly until the backplate is completely removed.

Insert the plastic opening tools into the seam on the back plate of the laptop.

A popping sound may come from your device while you remove the backplate.

Pry the back plate up.

Slide the plastic opening tool around the laptop’s edge slowly until the backplate is completely removed.

Step 3

  • Remove the three 2.0mm screws using the JIS #0 screwdriver.

Remove the three 2.0mm screws using the JIS #0 screwdriver.

Step 4

  • The white plastic clip secures the fan wires to the laptop.
  • Unplug the white clip by grasping it and wiggling it back and forth .
  • Do not pull the clip out by the wires themselves.

The white plastic clip secures the fan wires to the laptop.

Unplug the white clip by grasping it and wiggling it back and forth .

Do not pull the clip out by the wires themselves.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 5 other contributors 

                    Adrian Nelson                     

Member since: 09/18/2018

270 Reputation

                                      2 Guides authored                  



                       Badges:
                       5







                                                        +2 more badges                           

Team

                       University of North Texas, Team S4-G1, Raign Fall 2018                        

                                                  Member of University of North Texas, Team S4-G1, Raign Fall 2018 



                    UNT-RAIGN-F18S4G1                     


                                            4 Members                     


                                            5 Guides authored