Msi Gs63Vr 6Rf Stealth Pro Battery Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

                          10 - 20 minutes

Sections

Battery
3 steps

Flags

BackMSI GS63VR 6RF Stealth Pro
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Battery

Before you begin, be sure to turn off your laptop and discharge the battery down to 25%.
Use a Phillips screwdriver to remove the 15 screws securing the back cover.
Insert an opening tool or spudger in the seam and pry along the perimeter to loosen the back cover.
Do not insert the opening too too far into the back edge (with “Stealth” written on it), or you may damage the power LED.
The back cover is secured with clips. Too much pressure from the spudger can break the clips, but some flex is not dangerous.
Remove the back cover.

Before you begin, be sure to turn off your laptop and discharge the battery down to 25%.

Use a Phillips screwdriver to remove the 15 screws securing the back cover.

Insert an opening tool or spudger in the seam and pry along the perimeter to loosen the back cover.

Do not insert the opening too too far into the back edge (with “Stealth” written on it), or you may damage the power LED.

The back cover is secured with clips. Too much pressure from the spudger can break the clips, but some flex is not dangerous.

Remove the back cover.

1024

Step 2

Disconnect the battery by carefully pulling its connector towards the battery.
Pull parallel to the battery, not straight up.

Disconnect the battery by carefully pulling its connector towards the battery.

Pull parallel to the battery, not straight up.

Step 3

The battery is attached to the laptop with a strong adhesive.
Lift the battery from laptop.
Be careful not to bend the or puncture the battery, as that may cause a fire hazard.

The battery is attached to the laptop with a strong adhesive.

Lift the battery from laptop.

Be careful not to bend the or puncture the battery, as that may cause a fire hazard.

To reassemble your device, follow these instructions in reverse order.

For optimal performance, after completing this guide, calibrate your newly installed battery.

Take your e-waste to an R2 or e-Stewards certified recycler.

Repair didn’t go as planned? Try some basic troubleshooting, or ask our Answers community for help.

Cancel: I did not complete this guide.

                                                                                      4 other people completed this guide.

Author

                                      with 5 other contributors

                    Jay Etzkorn

Member since: 09/20/2017

197 Reputation

                                      1 Guide authored                  



                       Badges:
                       6







                                                        +3 more badges

Team

                       University of North Texas, Team S5-G5, Thomas Fall 2017                        

                                                  Member of University of North Texas, Team S5-G5, Thomas Fall 2017 



                    UNT-THOMAS-F17S5G5                     


                                            4 Members                     


                                            4 Guides authored

Introduction#

What you need#

#

#

#

#

#

Team#

#

Introduction

What you need

Team