Difficulty

Difficult

Steps

18

Time Required

                          45 minutes

Sections

3

  • Battery
  • 3 steps
  • Motherboard
  • 13 steps
  • RAM
  • 2 steps

Flags

1

Better Introduction

Improve this guide by completing or revising its introduction.

  • BackMSI GS60 6QE Ghost Pro 4K

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Remove the eleven 5mm screws with a Phillips #0 bit.
  • Remove the four 2.5mm screws with a Phillips #0 bit.

Remove the eleven 5mm screws with a Phillips #0 bit.

Remove the four 2.5mm screws with a Phillips #0 bit.

1024

Step 2

  • After opening the bottom plate, locate the battery and the battery connection.

After opening the bottom plate, locate the battery and the battery connection.

Step 3

  • Unplug the battery connection carefully from the motherboard, and remove the old battery.

Unplug the battery connection carefully from the motherboard, and remove the old battery.

Step 4

              Motherboard
  • Remove the four 2.5 mm screws from the motherboard.

Remove the four 2.5 mm screws from the motherboard.

Step 5

  • Unplug the speaker wire.

Unplug the speaker wire.

Step 6

  • Gently lift the selected black tab that connects the cable onto the board and then slide out the cable.
  • Be careful not to break the black cover.

Gently lift the selected black tab that connects the cable onto the board and then slide out the cable.

Be careful not to break the black cover.

Step 7

  • Gently lift the selected black tab that connects the cable onto the board and then slide out the cable.
  • Be careful not to break the black cover because it can be broken easily

Be careful not to break the black cover because it can be broken easily

Step 8

  • Gently lift the selected black tab that connects the cable onto the board and then slide out the cable.
  • Be careful not to break the black cover. lift it up gently

Be careful not to break the black cover. lift it up gently

Step 9

  • Gently lift the selected black tab that connects the cable onto the board and then slide out the cable.

Step 10

Step 11

  • Unplug the selected cable

Unplug the selected cable

Step 12

  • Locate and unplug the selected cables.

Locate and unplug the selected cables.

Step 13

  • Gently lift the selected black tab that connects the cable onto the board and then slide out the cable.
  • Unplug it carefully without breaking the black cover.

Unplug it carefully without breaking the black cover.

Step 14

  • Gently unplug the selected cable

Gently unplug the selected cable

Step 15

  • Gently remove the electronic component by sliding it out and lifting it up after unscrewing the 2.5 mm screw
  • Make sure your unscrew the screw first and unplug the chip from the motherboard. Do not disconnect the wires connected to the chip

Gently remove the electronic component by sliding it out and lifting it up after unscrewing the 2.5 mm screw

Make sure your unscrew the screw first and unplug the chip from the motherboard. Do not disconnect the wires connected to the chip

Step 16

  • After unplugging all of the cables and unscrewing all of the screws, gently remove the motherboard out of the computer chassis
  • This part will take some effort but remember not to apply to much pressure on the motherboard as to not damage any of the small electrical components on the board

After unplugging all of the cables and unscrewing all of the screws, gently remove the motherboard out of the computer chassis

This part will take some effort but remember not to apply to much pressure on the motherboard as to not damage any of the small electrical components on the board

Step 17

              RAM
  • After removing the motherboard from the laptop chassis locate the RAM chips indicated by the red rectangle.

After removing the motherboard from the laptop chassis locate the RAM chips indicated by the red rectangle.

Step 18

  • Firmly grip the two rectangular Ram components, one at a time, and pull them up from the Motherboard, be gentle. Once this process is complete, you have successfully removed the Ram.

Firmly grip the two rectangular Ram components, one at a time, and pull them up from the Motherboard, be gentle. Once this process is complete, you have successfully removed the Ram.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      3 other people completed this guide.

Author

                                      with 3 other contributors 


                    Justin Pelley

Member since: 09/28/2017

161 Reputation

                                      1 Guide authored                  



                       Badges:
                       5







                                                        +2 more badges

Team

                       USF Tampa, Team S1-G4, Nance Fall 2017                        

                                                  Member of USF Tampa, Team S1-G4, Nance Fall 2017 



                    USFT-NANCE-F17S1G4                     


                                            3 Members                     


                                            5 Guides authored

Ondřej Kyzek - Aug 7, 2018

Reply

Thank you very much for this guide. I’ve successfully managed to replace my RAM with 16GB module.