Difficulty
Easy
Steps
4
Time Required
1 - 3 minutes
Sections
2
- Bottom Cover
- 3 steps
- RAM
- 1 step
Flags
0
BackMSI GP62MVR 6RF Leopard Pro
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Bottom Cover
- Place the laptop upside down.
- Remove the sixteen 5.5 mm screws with a Phillips #0 screwdriver.
Place the laptop upside down.
Remove the sixteen 5.5 mm screws with a Phillips #0 screwdriver.
1024
Step 2
- Use the Jimmy tool to evenly pry loose the bottom cover.
- Ensure that all sides are detached from the plastic hinging before attempting to remove the bottom cover.
Use the Jimmy tool to evenly pry loose the bottom cover.
Ensure that all sides are detached from the plastic hinging before attempting to remove the bottom cover.
Step 3
- Remove the back cover.
- Touching circuitry could damage components or result in personal shock; it is recommended that you now wear latex gloves to prevent both issues.
Remove the back cover.
Touching circuitry could damage components or result in personal shock; it is recommended that you now wear latex gloves to prevent both issues.
Step 4
RAM
- Remove the existing RAM cartridge.
- The other slot can be used for another RAM cartridge.
Remove the existing RAM cartridge.
The other slot can be used for another RAM cartridge.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 2 other contributors
Dawson
Member since: 01/16/2020
255 Reputation
2 Guides authored
Badges:
10
+7 more badges
Team
Embry-Riddle Aeronautical University, Team S7-G6, Rauch Spring 2020
Member of Embry-Riddle Aeronautical University, Team S7-G6, Rauch Spring 2020
ERAU-RAUCH-S20S7G6
4 Members
6 Guides authored