Difficulty
Moderate
Steps
4
Time Required
20 - 30 minutes
Sections
1
- LCD Screen
- 4 steps
Flags
0
BackMSI GP62MVR 6RF Leopard Pro
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
LCD Screen
- Using the Jimmy tool, pry the front cover off at the seam.
- The Jimmy tool is the utensil in the first picture in the user’s hand.
Using the Jimmy tool, pry the front cover off at the seam.
The Jimmy tool is the utensil in the first picture in the user’s hand.
1024
Step 2
- Remove the four 2 mm screws on the bottom and top corners of the screen using a Phillips #0 screwdriver.
Remove the four 2 mm screws on the bottom and top corners of the screen using a Phillips #0 screwdriver.
Step 3
- Using the Jimmy, pry off the unscrewed LCD display.
- Make sure the black adhesive is out of the way.
- Don’t pull the screen completely off, as the screen will still be attached.
Using the Jimmy, pry off the unscrewed LCD display.
Make sure the black adhesive is out of the way.
Don’t pull the screen completely off, as the screen will still be attached.
Step 4
- Remove the ribbon cable by pulling on the bar code tab.
Remove the ribbon cable by pulling on the bar code tab.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 2 other contributors
Jordan Buck
Member since: 01/16/2020
382 Reputation
4 Guides authored
Badges:
6
+3 more badges
Team
Embry-Riddle Aeronautical University, Team S7-G6, Rauch Spring 2020
Member of Embry-Riddle Aeronautical University, Team S7-G6, Rauch Spring 2020
ERAU-RAUCH-S20S7G6
4 Members
6 Guides authored
Jaime Blasco - Aug 28, 2020
Reply
Hey Jordan, when reassembling the front cover (which in my case, a GP63 Leopard 8RE, is glued at the bottom) what type of glue should be used? Thanks
Jordan Buck - Aug 29, 2020
Hi Jaime, two part expoxy (Alraldite) glue should work, otherwise 3M double-sided adhesive tape would work as well.
Ainsley - Jun 11, 2021
Reply
Hi Jordan,
If the screen is damaged due to the cover itself being bent, do you have any advice?
Thanks