Difficulty
Easy
Steps
9
Time Required
10 minutes
Sections
3
- Battery
- 4 steps
- Back Panel
- 3 steps
- Hard Drive
- 2 steps
Flags
0
BackMSI GP60 2PE Leopard
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Flip MSI GP60 2PE Leopard, so that the back is facing up.
Flip MSI GP60 2PE Leopard, so that the back is facing up.
1024
Step 2
- Find the unlock tab located on the upper right side of the device, then slide it to the right.
Find the unlock tab located on the upper right side of the device, then slide it to the right.
Step 3
- Slide and hold the release tab on the left side of the battery, so that you can remove the battery.
Slide and hold the release tab on the left side of the battery, so that you can remove the battery.
Step 4
- While holding the release tab, remove the battery slowly.
While holding the release tab, remove the battery slowly.
Step 5
Back Panel
- Flip the device over so the back is facing up.
Flip the device over so the back is facing up.
Step 6
- Remove the four 5mm screws from the back of the device using a Phillips #00 screwdriver.
- There is a screw located under the battery; lift the battery up to access it.
Remove the four 5mm screws from the back of the device using a Phillips #00 screwdriver.
There is a screw located under the battery; lift the battery up to access it.
Step 7
- Once all four screws are removed, lift the back off.
Once all four screws are removed, lift the back off.
Step 8
Hard Drive
- Remove the two 5 mm black screws on the right hand side with a Phillips #0 screwdriver.
Remove the two 5 mm black screws on the right hand side with a Phillips #0 screwdriver.
Step 9
- Lift the hard drive, then remove from the device. There is a black strip of plastic attached to make the process easier.
Lift the hard drive, then remove from the device. There is a black strip of plastic attached to make the process easier.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
3 other people completed this guide.
Author
with 4 other contributors
Zoey Calcagno
Member since: 10/04/2018
672 Reputation
5 Guides authored
Badges:
10
+7 more badges
Team
Linn Benton Community College, Team S1-G4, Karnes Fall 2018
Member of Linn Benton Community College, Team S1-G4, Karnes Fall 2018
LBCC-KARNES-F18S1G4
4 Members
6 Guides authored