Difficulty
Easy
Steps
7
Time Required
10 minutes
Sections
2
- Battery
- 6 steps
- Optical Drive
- 1 step
Flags
0
BackMSI GE72 7RD
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Make sure the laptop is off and unplugged (not charging).
- With the laptop closed and upside down, unscrew the nineteen 5.5mm Phillips #1 screws that keep the back cover in place.
Make sure the laptop is off and unplugged (not charging).
With the laptop closed and upside down, unscrew the nineteen 5.5mm Phillips #1 screws that keep the back cover in place.
1024
Step 2
- Slide the optical drive out of the laptop.
Slide the optical drive out of the laptop.
Step 3
- Use a Phillips screwdriver to remove the three screws along the edge of the optical drive bay.
Use a Phillips screwdriver to remove the three screws along the edge of the optical drive bay.
Step 4
- Using your fingers, gently loosen the edges of all four sides of the back cover.
- Gently pull off the back cover.
Using your fingers, gently loosen the edges of all four sides of the back cover.
Gently pull off the back cover.
Step 5
- Unscrew the single 5.5mm Phillips #1 screw keeping the battery secure.
Unscrew the single 5.5mm Phillips #1 screw keeping the battery secure.
Step 6
- Grab the battery with your fingers and gently pull it up and away from the rest of the laptop.
Grab the battery with your fingers and gently pull it up and away from the rest of the laptop.
Step 7
Optical Drive
- Carefully slide the Optical Drive off of the SATA connector.
- The red marker shows the location for where the retaining screw comes through the back panel to hold the Optical Drive.
Carefully slide the Optical Drive off of the SATA connector.
The red marker shows the location for where the retaining screw comes through the back panel to hold the Optical Drive.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 1 other contributor
Riley Smith
Member since: 09/22/2017
779 Reputation
4 Guides authored
Badges:
8
+5 more badges
Team
Central Washington University, Team S1-G2, Pengilly Fall 2017
Member of Central Washington University, Team S1-G2, Pengilly Fall 2017
CWU-PENGILLY-F17S1G2
4 Members
4 Guides authored
Kevin - Dec 18, 2018
Reply
Why do you have to remove the battery first?
croberts1290 - Mar 11, 2019
Reply
So you don’t have power running through it while working on it.